Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 2425MCB18-60
Variations
Balancing support with compliance, this 24 x 25 mm conical buffer (SKU 2425MCB18-60) is built for installations where neither extreme isolation nor maximum load-bearing is the priority, the broad middle ground of machinery mounting. Rated to a maximum load of 51 kg with a controlled deflection of 6.25 mm, the 60 Shore A rubber compound provides a responsive yet measured cushioning action suited to compact plant and sensitive assemblies where consistent damping under moderate loading is essential. The rubber-to-metal bonded construction transmits forces efficiently across the mount whilst resisting loosening in service. The M6 x 18 mm threaded stud allows straightforward installation into standard tapped locations, and the conical geometry enables loading in compression, shear, or a combined mode, adapting to the varied mounting orientations found across industrial and mobile equipment. Energy is absorbed and dissipated within the rubber body, reducing transmitted vibration and cushioning impact shocks from external moving components. At 60 Shore A, this buffer occupies the general-purpose band of the conical range: harder than the 45 Shore A variant where softer deflection and greater isolation are needed for lighter, more sensitive loads, yet less stiff than the 70 Shore A grade where heavier duty restraint is required. Typical applications include agricultural equipment, commercial vehicles, elevators, and industrial machinery where a balance of isolation and structural support is demanded. This buffer is available in a 45 Shore A variant (2425MCB18-45) for softer isolation duty and a 70 Shore A variant (2425MCB18-70) for higher-load applications.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 24 |
| Overall height H (mm) | 25 |
| Stud thread d | M6 |
| Stud length L (mm) | 18 |
| Max load (kg) | 51 |
| Deflection (mm) | 6.25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 2514MCB20-60 | 3030MCB14-60 | 2515MCB25-60 | 2520MCB18-60 | 2520MCB20-60 |
| Type | Buffer | Buffer | Buffer | Buffer | Buffer |
| Length | 14mm | ||||
| Height | 30mm | 15mm | 20mm | 20mm | |
| Size | 25x14mm | 30x30mm | |||
| Deflection | 3.5 | 7.5mm | 3.5mm | 3.5mm | 3.5mm |
| Diameter | 25mm | ||||
| Diameter Range | 11-25mm | ||||
| Length Range | 11-25mm | ||||
| Shore Hardness | 60 | ||||
| Thread | M8 | M6 | M6 | M8 | M8 |
| Show More | |||||
A. The buffer measures 24 mm outer diameter by 25 mm height, with an M6 threaded stud of 18 mm in length.
A. The 2425MCB18-60 is rated to a maximum load of 51 kg with a controlled deflection of 6.25 mm under that load.
A. At 60 Shore A, this buffer sits in the general-purpose mid-range — harder than softer grades that offer greater deflection and better isolation at lower loads, yet less stiff than harder grades designed for higher loads with reduced movement. It provides a balance of vibration isolation and structural support.
A. The rubber-to-metal bonded conical construction allows loading in compression, shear, or a combination of both, accommodating varied mounting orientations across industrial and mobile equipment.
A. The buffer is used across agricultural equipment, commercial vehicles, elevators, and industrial machinery — any application requiring balanced damping of vibration and cushioning of impact shocks under moderate loads.
A. Yes. The same 24 x 25 mm M6 conical buffer is available in a 45 Shore A grade (SKU 2425MCB18-45) for softer isolation and greater deflection, and a 70 Shore A grade (SKU 2425MCB18-70) for higher-load, reduced-deflection duty.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds, plus additional and custom sizes, are available on request.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
