Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7045MM37-60
Variations
With a rated maximum load of 232.0 kg with a controlled deflection of 3.9 mm, the 7045MM37-60 is a 70 x 45 mm male-male bobbin anti-vibration mount with M12 x 37 mm threaded studs and a 60 Shore A rubber hardness grade, positioning it at the upper end of the standard range and built to handle heavier machinery where both structural support and meaningful vibration attenuation are required simultaneously. The 60 Shore A medium-grade rubber delivers the broad middle ground that demanding installations call for: firm enough to carry substantial dynamic load without excessive movement, yet sufficiently compliant to absorb vibration and shock across mixed operating cycles. Rubber-to-metal bonded construction locks the elastomer to the steel hardware for consistent load transfer, and the mount is designed to operate in shear, compression, or a combination of both, giving engineers flexibility in how the mount is orientated within a fabrication. These characteristics make the 7045MM37-60 well suited to applications where a softer grade would deflect too much under load, yet a harder grade would transmit too much vibration to surrounding structures or operators. Typical installations include diesel engines, generator sets, industrial machinery and equipment, and exhaust mountings where continuous or intermittent shock loads are present. The geometry and load rating also make this mount appropriate for construction and off-highway equipment, agricultural plant, marine auxiliaries, and power-generation installations. It performs equally in air-conditioning unit mounting where compressor mass and run-cycle shock must be managed together.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 45 |
| Stud thread d | M12 |
| Stud length L (mm) | 37 |
| Max load (kg) | 232 |
| Deflection (mm) | 3.9 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Anti-Vibration Mount - Male - Male Bobbin Range, M10, Max Load 232Kg - 7045MM25-60
£15.46
£15.16
2% OFF
|
Anti-Vibration Mount - Male - Male Bobbin Range, M12, Max Load 235Kg - 7555MM37-60
£15.90
£15.59
2% OFF
|
Anti-Vibration Mount - Male - Male Bobbin Range, M10, Max Load 227Kg - 6025MM25-60
£14.48
£14.20
2% OFF
|
||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 7045MM25-60 | 6025MF25-60 | 6045MM25-70 | 7555MM37-60 | 6025MM25-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 25mm | 45mm | |||
| Height | 45mm | 55mm | 25mm | ||
| Size | 70x45mm | 60x25mm | 60x45mm | 75x55mm | 60x25mm |
| Deflection | 3.9 | 2 | 4 | 4.9 | 2 |
| Diameter | 60mm | 60mm | |||
| Diameter Range | 51-100mm | 51-100mm | |||
| Length Range | 11-25mm | 26-50mm | |||
| Mount Dimension | 70mm | 75mm | 60mm | ||
| Shore Hardness | 60 | 70 | |||
| Thread | M10 | M10 | M10 | M12 | M10 |
| Show More | |||||
A. The mount has an outer diameter and height of 70 x 45 mm, with M12 x 37 mm threaded studs. It is rated to a maximum load of 232.0 kg with a deflection of 3.9 mm.
A. A 60 Shore A rating places this mount in the medium hardness band. It balances load-carrying capacity with vibration isolation, making it suitable for heavier machinery where both structural support and attenuation of vibration or shock are needed. Softer grades offer greater deflection and better isolation at lower loads; harder grades carry higher loads with less movement.
A. The mount can be loaded in shear, compression, or a combination of both, providing flexibility in installation orientation depending on the application.
A. It is suited to diesel engines, generator sets, industrial machinery and equipment, exhaust mountings, and air-conditioning units. Relevant industry sectors include construction and off-highway, agriculture, power generation, marine, and automotive.
A. Yes. The same geometry is available in 45 Shore A (SKU 7045MM37-45) for lighter-load isolation applications and 70 Shore A (SKU 7045MM37-70) where maximum load restraint is the priority.
A. Yes. Stainless steel hardware and oil-resistant or high-temperature rubber compounds are available on request for use in chemically aggressive or elevated-temperature environments.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
