Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 6045MM25-45
Variations
Calibrated for maximum vibration isolation, the 6045MM25-45 is a 60x45mm male-male bobbin mount in 45 Shore A rubber, the softest grade in this geometry. Built to give the greatest deflection and the highest degree of low-frequency isolation within the range. At a rated maximum load of 89.0 kg and a deflection figure of 4.0 mm, this grade prioritises movement compliance over restraint, making it the correct choice where isolating the structure from transmitted vibration matters more than limiting displacement. Rubber-to-metal bonded construction gives the mount its structural integrity across shear, compression, or combined loading modes. The M10 x 25 mm threaded stud configuration allows direct bolt-up into standard M10 tapped locations, keeping installation straightforward. As with all mounts in this family, the rubber element is bonded to the steel inserts under controlled conditions to ensure consistent load-deflection behaviour throughout service life. Custom options including stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request. The 45 Shore A hardness grade is particularly suited to sensitive or lightly loaded equipment, instrumentation, smaller generator sets, diesel engines in light-duty configurations, air-conditioning units, and industrial machinery where operator comfort and protection of surrounding structures are primary objectives. The softer compound absorbs vibration energy efficiently at lower load levels, reducing transmitted shock to adjacent components and extending machinery lifespan. Industries including marine, agriculture, power generation, and construction and off-highway all benefit from this grade where load conditions fall within its rated band.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 45 |
|---|---|
| Body diameter D (mm) | 60 |
| Overall height H (mm) | 45 |
| Stud thread d | M10 |
| Stud length L (mm) | 25 |
| Max load (kg) | 89 |
| Deflection (mm) | 4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 4028MM25-70 | 4030MF23-70 | 4030MF25-70 | 4020FF08-70 | 6550MF37-45 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 28mm | 30mm | 30mm | 20mm | 50mm |
| Size | 40x28mm | 40x30mm | 40x30mm | 40x20mm | 65x50mm |
| Deflection | 2.4 | 2.6 | 2.6 | 1.2 | 4.5 |
| Diameter | 40mm | 40mm | 40mm | 40mm | 65mm |
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 51-100mm |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 11-25mm | 26-50mm |
| Shore Hardness | 70 | 70 | 70 | 70 | 45 |
| Thread | M10 | M8 | M10 | M8 | M12 |
| Show More | |||||
A. The 6045MM25-45 is rated to a maximum load of 89.0 kg with a deflection of 4.0 mm. The 45 Shore A rubber grade delivers the greatest deflection in this bobbin geometry, providing maximum compliance under load for effective low-frequency vibration isolation.
A. The mount uses an M10 thread with a stud length of 25 mm on both ends, in a male-male configuration for direct bolt-up into M10 tapped locations on equipment and support structures.
A. The mount has an outer diameter of 60 mm and a height of 45 mm (D x H: 60 x 45 mm).
A. The mount can be used in shear, compression, or a combination of both, making it adaptable to a range of equipment mounting configurations.
A. The softer 45 Shore A grade is well suited to sensitive or lightly loaded equipment including instrumentation, air-conditioning units, diesel engines in light-duty configurations, smaller generator sets, and industrial machinery where vibration isolation is the primary requirement. Industries served include marine, agriculture, power generation, construction and off-highway, and automotive.
A. Softer rubber grades give greater deflection and better isolation, particularly at lower loads and frequencies. If your application requires a higher load capacity or reduced movement under load, the 6045MM25-60 (60 Shore A) and 6045MM25-70 (70 Shore A) variants in the same 60x45mm geometry carry greater loads with less deflection. The appropriate grade depends on the load and isolation requirements of the specific application.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available as custom options on request. Contact PartsForMachines to discuss specific requirements.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
