Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 2525MM18-70
Variations
Carrying a maximum load of 32.0 kg with a minimal deflection of just 2.1 mm, the 2525MM18-70 is a 70 Shore A firm-grade male-male bobbin mount engineered to hold equipment securely under heavier loads, shock, and sustained impact. With a 25 mm diameter, 25 mm height, and M6 x 18 mm threaded studs at both ends, this compact mount is built for applications where controlled movement is critical and positional restraint takes precedence over maximum isolation. Rubber-to-metal bonded construction gives the 2525MM18-70 its structural integrity, while the firm 70 Shore A rubber compound delivers the stiffness needed to resist displacement under load. The mount may be used in shear, compression, or a combination of both, lending it versatility across different installation orientations. Its design supports improved machinery lifespan, protects surrounding structures, and contributes to operator comfort by absorbing residual shock and vibration at the source. This mount is suited to heavier-duty applications within its compact size band, including diesel engines, generator sets, industrial machinery and equipment, and exhaust mountings where the mount must resist movement rather than permit it. It also finds use in agricultural machinery, automotive, marine, and power generation installations where impact and load stability are the primary requirement. The firm rubber grade is the appropriate choice when softer grades would deflect excessively or allow unwanted movement under operating conditions.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 25 |
| Overall height H (mm) | 25 |
| Stud thread d | M6 |
| Stud length L (mm) | 18 |
| Max load (kg) | 32 |
| Deflection (mm) | 2.1 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 4020FF08-45 | 2008MM18-60 | 2010MM10-60 | 2010MM15-60 | 2520FF06-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 20mm | 08mm | 20mm | ||
| Height | 10mm | 10mm | |||
| Size | 40x20mm | 20x08mm | 25x20mm | ||
| Deflection | 1.2 | 0.8 | 0.8 | 0.8 | 1.6 |
| Diameter | 40mm | 20mm | 25mm | ||
| Diameter Range | 26-50mm | 11-25mm | 11-25mm | ||
| Length Range | 11-25mm | Up to 10mm | 11-25mm | ||
| Mount Dimension | 20mm | 20mm | |||
| Shore Hardness | 45 | 60 | 60 | ||
| Thread | M8 | M6 | M5 | M6 | M6 |
| Show More | |||||
A. The mount measures 25 mm diameter by 25 mm height, with M6 x 18 mm male threaded studs at both ends. It has a maximum load capacity of 32.0 kg and a deflection of 2.1 mm.
A. The 70 Shore A firm rubber grade carries higher loads with less movement. It is the appropriate choice where positional restraint, shock resistance, or heavier operating loads are the priority. Softer grades (45 Shore A or 60 Shore A) provide greater deflection and better isolation for lighter or more vibration-sensitive applications.
A. The mount may be loaded in shear, compression, or a combination of both, giving flexibility across different installation configurations.
A. Source-confirmed applications include diesel engines, generator sets, exhaust mountings, industrial machinery and equipment, and air-conditioning units. Industries served include power generation, agriculture, automotive, marine, construction and off-highway, and railway and mass transit.
A. Yes. The same geometry is available in 45 Shore A (SKU 2525MM18-45) for maximum deflection and isolation, and 60 Shore A (SKU 2525MM18-60) as a general-purpose mid-grade option.
A. Yes. Stainless steel metal components and oil-resistant or high-temperature rubber compounds, as well as additional and custom sizes, are available on request.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
