Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 2515MM18-70
Variations
Compact yet firm-holding, the 2515MM18-70 is a 25x15mm male-male bobbin mount rated to a maximum load of 48.0kg with a minimal deflection of just 1.2mm, figures that place it at the restrained, high-resistance end of the 25x15mm bobbin range. At 70 Shore A, this mount is engineered to hold components firmly under heavier loading conditions, resisting movement and absorbing shock and impact rather than allowing the isolating compliance that softer grades provide. It is the right choice where positional control and structural restraint matter as much as vibration reduction. Constructed with a rubber-to-metal bonded body, the mount accepts M6 threaded studs (18mm stud length) on both faces and may be loaded in shear, compression, or a combination of both. The 70 Shore A rubber resists deflection to protect surrounding structures and extend machinery service life, making it well suited to applications carrying concentrated or dynamic loads in compact installations where softer grades would allow excessive movement. This mount serves a broad range of industrial and mobile applications including diesel engines, generator sets, exhaust mountings, air-conditioning units, and industrial machinery and equipment. Industries served include power generation, construction and off-highway, agriculture, marine, automotive, and railway and mass transit. The 70 Shore A grade is particularly suited to environments where shock and impact loading are routine, or where the mounted component must remain firmly located throughout its operating cycle. This SKU forms part of a wider male-male bobbin mount family.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 25 |
| Overall height H (mm) | 15 |
| Stud thread d | M6 |
| Stud length L (mm) | 18 |
| Max load (kg) | 48 |
| Deflection (mm) | 1.2 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 2510MM18-60 | 2515MF18-70 | 3022MM20-70 | 5040MM25-45 | 5040MM28-45 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 10mm | 15mm | 22mm | 40mm | 40mm |
| Size | 25x10mm | 25x15mm | 30x22mm | 50x40mm | 50x40mm |
| Deflection | 0.7 | 1.2 | 1.8 | 3.5 | 3.5 |
| Diameter | 25mm | 25mm | 30mm | 50mm | 50mm |
| Diameter Range | 11-25mm | 11-25mm | 26-50mm | 26-50mm | 26-50mm |
| Length Range | Up to 10mm | 11-25mm | 11-25mm | 26-50mm | 26-50mm |
| Shore Hardness | 60 | 70 | 70 | 45 | 45 |
| Thread | M6 | M6 | M8 | M10 | M10 |
| Show More | |||||
A. The 2515MM18-70 is rated to a maximum load of 48.0kg per mounting.
A. The rated deflection for this mount is 1.2mm — a low figure consistent with the 70 Shore A hardness grade, which carries load with minimal movement.
A. At 70 Shore A, this is the firmest grade in the 25x15mm male-male bobbin range. Harder grades carry higher loads with less deflection, making them the right choice where the mounted component must be held firmly and where shock and impact resistance are priorities over maximum isolation.
A. This mount uses M6 threaded studs on both faces with a stud length of 18mm, in a male-male (also referred to as Type A or Type 1) bobbin configuration.
A. This mount is suited to diesel engines, generator sets, exhaust mountings, air-conditioning units, and industrial machinery and equipment. The 70 Shore A grade is particularly appropriate where loads are heavier, shock and impact are present, or firm positional restraint of the mounted component is required.
A. The mount may be loaded in shear, compression, or a combination of both.
A. Yes. The same 25x15mm M6 male-male bobbin is available in 45 Shore A (SKU: 2515MM18-45), which gives greater deflection and better isolation at lower loads, and 60 Shore A (SKU: 2515MM18-60) for general-purpose mid-range applications.
A. Yes. Stainless steel metalwork and oil-resistant or high-temperature rubbers, as well as additional and custom sizes, are available on request.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
