Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7030MF37-70
Variations
Engineered to hold firm under heavy loading, the 7030MF37-70 is a 70x30mm male-female rubber bobbin mount with M12 threaded fixings and a 70 Shore A hardness rating, built for applications where controlled deflection and maximum load resistance take priority over isolation travel. At 445.0 kg maximum load capacity and a tightly limited deflection of just 2.4 mm, this mount is designed for high-load and shock-duty installations where the supported item must remain positively located without excessive movement. The rubber-to-metal bonded construction combines a male stud (M12 x 37 mm, d1) with a female tapped thread (M12, d2) at the opposite face, accepting in-line bolt-through or stud-mounted installations in shear, compression, or a combined loading axis. The 70 Shore A compound sits at the firm end of the hardness range, delivering the highest load bearing of the bobbin series whilst limiting compliance, the correct choice where mechanical restraint, shock absorption, and structural rigidity matter most. The 70 x 30 mm (D x H) body profile suits confined mounting locations on heavy plant and power equipment. Typical service environments for this hardness grade include diesel engine mounts on generator sets and construction machinery, exhaust system restraints, industrial machinery frames subject to impact or intermittent shock loading, and agricultural or off-highway equipment where robust location is essential. The mount is also suited to marine, railway, military, and power-generation applications where hard-duty mounting is specified. Stainless steel hardware and oil-resistant or high-temperature rubber compounds are available on request for demanding environments.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 30 |
| Stud thread d1 | M12 |
| Stud length L (mm) | 37 |
| Diameter / thread d2 (mm) | M12 |
| Max load (kg) | 445 |
| Deflection (mm) | 2.4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 7030FF10-70 | 9575FF12-60 | 9575FF16-60 | 7030MM25-70 | 7030MM37-70 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 30mm | 75mm | 75mm | 30mm | 30mm |
| Size | 70x30mm | 95x75mm | 95x75mm | 70x30mm | 70x30mm |
| Deflection | 2.4 | 6.7 | 6.7 | 2.4 | 2.4 |
| Diameter | 70mm | 95mm | 95mm | 70mm | 70mm |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 51-100mm | 51-100mm |
| Length Range | 26-50mm | 51-100mm | 51-100mm | 26-50mm | 26-50mm |
| Shore Hardness | 70 | 60 | 60 | 70 | 70 |
| Thread | M10 | M12 | M16 | M10 | M12 |
| Show More | |||||
A. The mount body measures 70 mm diameter by 30 mm height (D x H). The male stud is M12 x 37 mm (d1 x L) and the female tapped thread is M12 (d2).
A. The 7030MF37-70 is rated to a maximum load of 445.0 kg with a deflection of 2.4 mm — making it the appropriate choice where high load resistance and minimal movement are required.
A. A 70 Shore A rubber compound sits at the firm end of the hardness range. It carries the highest load with the least deflection, which is correct for heavy-load, shock, or impact applications where the mounted item must be held positively in position. Softer grades (45 or 60 Shore A) offer greater deflection and improved isolation at lower loads.
A. This mount is suited to diesel engines, generator sets, industrial machinery subject to shock or impact, exhaust system restraints, agricultural and construction off-highway equipment, marine installations, railway applications, and military and defence equipment where firm, high-load anti-vibration mounting is required.
A. Yes. The bobbin construction allows loading in shear, compression, or a combination of both axes, providing installation flexibility across a range of mounting configurations.
A. Yes. Stainless steel hardware and oil-resistant or high-temperature rubber compounds are available on request, in addition to custom and additional sizes.
A. The 70x30mm male-female bobbin is also available in 45 Shore A (7030MF37-45) and 60 Shore A (7030MF37-60). Larger body sizes include 100x50mm (10050MF44), 100x55mm (10055MF44), 100x60mm (10060MF44), 100x75mm (10075MF44), 100x100mm (100100MF44), and 100x8mm (1008MF10).
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
