Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7030MF37-45
Variations
Where vibration isolation takes priority over load restraint, the 70x30mm male-female bobbin mount at 45 Shore A delivers the compliance that lighter and sensitive equipment demands. Rated to a maximum load of 175 kg with a deflection of 2.4 mm, this M12-threaded mount is sized for mainstream general-machinery applications where isolating low-frequency vibration is the primary engineering objective rather than limiting movement. Its rubber-to-metal bonded construction provides a reliable, low-cost anti-vibration solution that can be loaded in shear, compression, or a combination of both. The soft 45 Shore A rubber compound is the key differentiator at this grade: softer hardness yields greater compliance under load, meaning the mount absorbs and dissipates vibration energy more effectively than harder grades, making it well-suited where protecting sensitive instruments, adjacent structures, or operators from transmitted vibration is the primary concern. The male-female thread configuration, m12 stud on the male end (37 mm stud length) and M12 female thread on the opposite face. Integrates directly into existing mounting arrangements without additional hardware. Rubber-to-metal bonding ensures long service life and structural integrity throughout the mount's working range. Typical applications for this grade and geometry include air-conditioning units, exhaust mountings, generator sets, industrial machinery, and general equipment installations where isolation performance at moderate loads is required. The family also serves construction and off-highway, agricultural, power generation, marine, railway and mass transit, automotive, and military and defence environments. Stainless steel variants and oil-resistant or high-temperature rubber compounds are available to order for demanding installations.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 45 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 30 |
| Stud thread d1 | M12 |
| Stud length L (mm) | 37 |
| Diameter / thread d2 (mm) | M12 |
| Max load (kg) | 175 |
| Deflection (mm) | 2.4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 100100FF16-45 | 6045FF10-60 | 6045FF12-60 | 5030MM23-70 | 5030MM28-70 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 100mm | 45mm | 45mm | 30mm | 30mm |
| Size | 100x100mm | 60x45mm | 60x45mm | 50x30mm | 50x30mm |
| Deflection | 9.2 | 4 | 4 | 2.5 | 2.5 |
| Diameter | 100mm | 60mm | 60mm | 50mm | 50mm |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 26-50mm | 26-50mm |
| Length Range | 51-100mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Shore Hardness | 45 | 60 | 60 | 70 | 70 |
| Thread | M16 | M10 | M12 | M8 | M10 |
| Show More | |||||
A. This mount has a maximum load rating of 175 kg and a deflection of 2.4 mm at that load.
A. The male end carries an M12 stud with a stud length of 37 mm; the female end has an M12 internal thread.
A. The body measures 70 mm in diameter by 30 mm in height (D x H: 70 x 30 mm).
A. Softer grades such as 45 Shore A provide greater deflection and better vibration isolation, particularly at lower frequencies and lighter loads. Harder grades carry higher loads with less movement but offer reduced isolation — so where protecting sensitive equipment or minimising transmitted vibration is the priority, the 45 Shore A grade is the appropriate choice.
A. The mount may be loaded in shear, compression, or a combination of both, giving flexibility in mounting orientation.
A. Typical applications include air-conditioning units, exhaust mountings, generator sets, instruments, and industrial machinery. Industries served include construction and off-highway, agriculture, power generation, marine, railway and mass transit, automotive, and military and defence.
A. Yes — 60 Shore A and 70 Shore A variants in the same 70x30mm M12 geometry are available as 7030MF37-60 and 7030MF37-70. Larger-body alternatives include 100100MF44, 10050MF44, 10055MF44, 10060MF44, 10075MF44, and 1008MF10.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds, as well as additional and custom sizes, are available on request.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
