Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Where vibration isolation takes priority over restraint, the 7070FF10-45 Female-Female Bobbin Mount delivers. Sized at 70 mm diameter by 70 mm height with an M10 female thread on both faces, this 45 Shore A soft-grade rubber mount is engineered specifically for lighter and sensitivity-critical equipment where the greatest possible attenuation of vibration and shock is the primary objective. At this hardness grade, the rubber yields a maximum deflection of 6.4 mm under its rated load, the highest compliance in the 70x70 Female-Female range. Giving the mount its characteristic ability to absorb low-frequency movement and isolate delicate components from transmitted vibration. Rubber-to-metal bonded construction unites the vulcanised 45 Shore A compound with the metal end-plates, producing a mount that can be loaded in shear, compression or a combination of both without risk of delamination. The soft grade is particularly well suited to instruments, generator sets and air-conditioning units, applications where structure-borne noise and low-amplitude, low-frequency vibration must be absorbed rather than simply constrained. With a maximum load rating of 113.0 kg per mount, the 7070FF10-45 sits comfortably in the mainstream general-machinery bracket, handling moderate static loads whilst still prioritising isolation performance over stiffness. The Female-Female thread configuration allows direct bolted installation between two tapped components without additional hardware, simplifying fitment in confined or symmetrical mounting arrangements.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 45 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 70 |
| Fixing thread / bolt size d | M10 |
| Max load (kg) | 113 |
| Deflection (mm) | 6.4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Anti-Vibration Mount - Male - Female Bobbin Range, M10, Max Load 113Kg - 5035MF25-60
£10.89
£10.68
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 7050MM25-45 | 7050MM37-45 | 5045MM25-70 | 5035MF25-60 | 5035FF10-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 50mm | 50mm | 45mm | ||
| Height | 35mm | 35mm | |||
| Size | 70x50mm | 70x50mm | 50x45mm | 50x35mm | 50x35mm |
| Deflection | 4.4 | 4.4 | 4 | 3 | 3 |
| Diameter | 70mm | 70mm | 50mm | ||
| Diameter Range | 51-100mm | 51-100mm | 26-50mm | ||
| Length Range | 26-50mm | 26-50mm | 26-50mm | ||
| Mount Dimension | 50mm | ||||
| Shore Hardness | 45 | 45 | 70 | ||
| Thread | M10 | M12 | M10 | M10 | M10 |
| Show More | |||||
A. The 7070FF10-45 is rated to a maximum load of 113.0 kg per mount with a maximum deflection of 6.4 mm. This high deflection figure reflects the soft 45 Shore A grade, which prioritises compliance and vibration isolation over stiffness.
A. Shore A hardness indicates the rubber compound's stiffness. At 45 Shore A, this is the softest grade in the 70x70mm Female-Female M10 range, giving the greatest deflection under load and the best isolation performance at lower loads and frequencies. It is best suited to lighter, sensitivity-critical or lower-frequency applications.
A. Source applications for this bobbin family include air-conditioning units, exhaust mountings, diesel engines, generator sets, instruments and industrial machinery. The 45 Shore A soft grade is particularly appropriate where instruments, generators or similar equipment require maximum attenuation of low-frequency vibration rather than high restraint.
A. The 7070FF10-45 may be loaded in shear, compression or a combination of both, in line with the rubber-to-metal bonded bobbin mount family design.
A. The mount is 70 mm in diameter and 70 mm in height, with M10 female threads on both faces.
A. Yes — the same geometry is offered in a 60 Shore A medium grade (7070FF10-60) and a 70 Shore A firm grade (7070FF10-70). Harder grades carry higher loads with less movement; softer grades such as this 45 Shore A unit offer greater deflection and better isolation at lower loads.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds, plus additional and custom sizes, are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
