Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Check your machine's wire feed guide or drive roller markings first. Most light-duty and mid-range MIG sets run 0.6 mm or 0.8 mm wire. Heavier industrial machines typically handle 1.0 mm. Using a diameter the drive roller is not rated for causes feed slip and inconsistent arc. If your machine manual is not to hand, the product listing specifies compatible diameters and machine ranges, or you can use Ask Simon on the relevant product page for an instant fitment check.

The main grades are mild steel (the workshop standard for general fabrication), stainless steel (for corrosion-resistant joints), and flux-cored wire (for gasless sets running without a shielding gas bottle). For everyday mild steel work, an ER70S-6 or equivalent copper-coated mild steel wire is the preferred choice among trade buyers. Stainless and flux-cored grades are listed separately and are not interchangeable with mild steel wire on the same job.

MIG wire is listed in 0.7 kg, 5 kg, and 15 kg spool weights. The 15 kg spool is suited to busy workshops running continuous or high-volume feeds, reducing changeover frequency and cost per metre. Smaller 0.7 kg and 5 kg spools work well for lower-throughput benches, job-lot work, or where bench space limits spool capacity. Check that your wire feeder hub and retaining nut will accept a 15 kg spool before ordering.

TIG filler wire and rod are selected by matching the filler alloy to the base material: ER70S-2 or similar for mild steel, ER308L for 304 stainless, and ER4043 or ER5356 for aluminium are common pairings. Rod diameter is chosen to suit joint thickness and amperage range. Cut length (typically 1 metre lengths sold in kilogram packs) determines pack quantity. Each listing states the alloy, diameter, and cut length, so cross-reference those three points against your procedure sheet.

Clear

Electrodes & Wires

FilterFilters
View as Grid List

The wire or electrode on the end of a weld is what actually joins metal to metal, and getting the wrong grade, diameter, or spool size for the machine and the job creates problems no technique can fix. PartsForMachines lists replacement and consumable welding wires and electrodes to suit the MIG and TIG machines covered across the site, as an Authorised Distributor and Seller for those equipment ranges.

MIG wire is selected by diameter (typically 0.6 mm, 0.8 mm, or 1.0 mm), alloy grade (mild steel, stainless, or flux-cored for gasless sets), and spool weight. The 15 kg spool is the workshop-volume choice for trade buyers running continuous feeds; smaller 0.7 kg and 5 kg spools suit lower-throughput benches or job-lot work. TIG welding wire and TIG welding rod are matched by the base material being joined and the filler alloy required, with rod diameter and cut length defining pack selection. Each listing specifies the wire type, diameter, and compatible machine ranges, so cross-referencing against the machine model is straightforward.

Wire and electrodes are the part of the weld that gets used up fastest, and pairing a spool change with a liner and contact tip check is the habit that keeps feed quality consistent. SIP-compatible welding wire is among the regularly listed options, alongside grades suited to Clarke and other machines in the same category section.

For diameter confirmation, grade queries, or trade spool quantities, contact the team via WhatsApp 07754288583 or email [email protected].

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 27 of 27 entries
FAQs

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Check your machine's wire feed guide or drive roller markings first. Most light-duty and mid-range MIG sets run 0.6 mm or 0.8 mm wire. Heavier industrial machines typically handle 1.0 mm. Using a diameter the drive roller is not rated for causes feed slip and inconsistent arc. If your machine manual is not to hand, the product listing specifies compatible diameters and machine ranges, or you can use Ask Simon on the relevant product page for an instant fitment check.

The main grades are mild steel (the workshop standard for general fabrication), stainless steel (for corrosion-resistant joints), and flux-cored wire (for gasless sets running without a shielding gas bottle). For everyday mild steel work, an ER70S-6 or equivalent copper-coated mild steel wire is the preferred choice among trade buyers. Stainless and flux-cored grades are listed separately and are not interchangeable with mild steel wire on the same job.

MIG wire is listed in 0.7 kg, 5 kg, and 15 kg spool weights. The 15 kg spool is suited to busy workshops running continuous or high-volume feeds, reducing changeover frequency and cost per metre. Smaller 0.7 kg and 5 kg spools work well for lower-throughput benches, job-lot work, or where bench space limits spool capacity. Check that your wire feeder hub and retaining nut will accept a 15 kg spool before ordering.

TIG filler wire and rod are selected by matching the filler alloy to the base material: ER70S-2 or similar for mild steel, ER308L for 304 stainless, and ER4043 or ER5356 for aluminium are common pairings. Rod diameter is chosen to suit joint thickness and amperage range. Cut length (typically 1 metre lengths sold in kilogram packs) determines pack quantity. Each listing states the alloy, diameter, and cut length, so cross-reference those three points against your procedure sheet.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service