The LAP Electrical LAPCV214 is a lapcv combination/marker/interior with 130mm. The LAPCV commercial vehicle lighting range is fully ECE approved, with IP67/IP69K sealing across combination rear lamps, marker lamps and interior lighting. Approval: R65 Class II on hazard/marker combos only. Multi-voltage input covers both 12V and 24V vehicle systems. The part number LAPCV214 identifies this exact configuration; check it against your requirement before ordering. Specifications for this model are listed in the technical details below. The range covers stop, tail, indicator, reverse and marker functions for trucks, trailers and commercial bodywork. The part number LAPCV214 identifies this exact configuration; check the technical details below before ordering. ECE R65 approval means the flash output meets the UN regulation for special warning lamps, which is the requirement insurers and site operators typically ask for on road-going amber beacons and bars. The IP rating indicates sealing against dust and water ingress appropriate to exterior mounting. Full technical details for this part number are listed in the specifications table below. Because each lamp in the LAPCV range is ECE approved for its function, the fitted vehicle remains compliant for road use without additional certification.
Additional Information:
Combining ECE approved marker lights with R65 class II approved amber warning lights. Available with white, amber and red LED marker lights, each module is manufactured with 6 x amber LEDs to provide ECE R65 class II amber warning lights. Multi-voltage operation (10-30V)
Front (white), side (amber) and rear (red) LED marker lights
ECE R65 approved class II approved central amber warning lights
Link multiple units for synchronised flash
Low profile design
IP69K ingress protection
Ideal for recovery trucks, HGVs, refuse trucks and mining applications