





















Save Extra With 1 Offer
A. The unique 360° swivel and tilt function, covered by an exclusive patent registered to Sealey, allows you to position the light source in any direction to suit your working environment.
A. The 4W SMD LED side light delivers up to 400 lumens on high and 200 lumens on low, with a 120° spread to illuminate the whole work area. The top directional torch uses a 3W SMD LED and outputs 120 lumens.
A. Operating time is 3 hours on side high, 7 hours on side low, and 8 hours on the top torch. The 3.7V 2.2Ah lithium-ion battery fully recharges in 3.5 hours via the included USB cable.
A. The light features two swivel hooks and three rubber-covered magnets - two on the rear and one on the end - giving you multiple hands-free mounting options on ferrous surfaces or overhead structures.
A. The LED3602B carries an IP54 rating, meaning it is protected against dust ingress and water spray from any direction.
A. This model is the blue version. Other variants in the same product family include LED3602, LED3602COMBO1, LED3602G, and LED3602R. These share the same core product design but differ in colour or configuration.
A. Yes. Alternative inspection lights available include LED0131R, LED01G, LED02G, and LED1001. Each is a different product that performs a similar inspection lighting function - contact Parts for Machines for help choosing the right one.
A. The LED3602B is supplied with a USB cable for charging via the built-in micro USB port.
A. The length adjusts between a minimum of 255mm and a maximum of 270mm.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service