The LAP Electrical LXB060AG is a LED beacon with single bolt fitting. LAP Electrical LED beacons provide LED warning output with multi-voltage 12/24V input and a choice of fittings across the range: magnetic, DIN pole, flexi-DIN pole, 3-bolt and single-bolt mounting. The same beacon is available in other fittings within this range (LXB040AG, LXB050AG), so choose the model whose mounting matches your vehicle: magnetic for temporary use, DIN or flexi-DIN pole for pole mounting, and bolt fittings for permanent installation. Designed and made in the UK. The part number LXB060AG identifies this exact configuration; check it against your requirement before ordering. Specifications for this model are listed in the technical details below. The single-bolt fitting is a permanent installation through a single fixing hole. LED beacons of this type are fitted to plant, agricultural machinery, recovery vehicles and utility fleets wherever an amber warning lamp is required. The part number LXB060AG identifies this exact configuration; check the technical details below before ordering.
Additional Information:
The LXB range combines amber and green LEDs in one to eliminate the need for 2 separate beacons. An ideal solution where green beacon seat belt warning systems are required such as plant and agricultural applications. EMC (ECE R10) approved
Multi-voltage (10-30V)
Three selectable flash patterns (single, double and rotating)
Manufactured with 12 x 3W amber and 12 x 3W green LEDs
Alternate amber and green flash when seat belt is engaged
Amber only flash when seat belt is disengaged
IP65 ingress protection
-30°C to +50°C extreme temperature reliability
Integral flash pattern selector
Quick-release mini plug on LXB040AG (flexi-DIN) for simple swap if beacon is damaged