Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 4 working days |
| Next Day | £15.54 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
Product Number: 09115
The SIP 09115 mig torch diffuser. The SIP 36 Gas Diffuser is designed for increased durability and performane in MIG welding applications, helping to provide consistent and effective flow of shielding gas to be directed into weldpools, therefore giving precise and efficient coverage. High-quality replacement gas diffuser. Designed to help direct gas to the weldpools. Compatible across the sip welding range — check product specifications for exact model fit. Also known as mig nozzle diffuser in welding supplies catalogues.
Additional Information:
The SIP 36 Gas Diffuser is designed for increased durability and performane in MIG welding applications, helping to provide consistent and effective flow of shielding gas to be directed into weldpools, therefore giving precise and efficient coverage.About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| ITEM NO | 09115 |
|---|---|
| Component Type | Gas Diffuser |
| Suitable For | 05515 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 4 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 02676 | 02711 | 01062 | 08169 | 09699 |
A. The SIP 09115 is for MB36 MIG torch bodies. Gas shrouds are torch-specific — confirm the torch type matches before ordering. A shroud that doesn't seat correctly on the torch body will have poor gas seal, causing porosity.
A. A conical shroud tapers toward the contact tip — it gives better visibility of the weld joint and is commonly used for thin sheet and positional welding. A cylindrical shroud provides a longer, more parallel gas column — better for thicker material and higher wire speeds. Both are effective for general MIG welding.
A. Replace when spatter buildup inside the shroud restricts gas flow (even after cleaning), when the shroud is physically deformed or cracked, or when the contact tip is no longer fully protected inside the shroud bore. Spatter-soaked shrouds are a common hidden cause of porosity.
A. Yes — applying anti-spatter spray or compound to the inside of the shroud before welding significantly reduces spatter adhesion and extends shroud life. Reapply when the inside coating wears off. Avoid getting spray on the contact tip — it can affect wire contact.
A. Clean after every welding session. Use shroud pliers or a nozzle reamer to remove spatter before it fuses permanently. A few seconds of cleaning extends shroud life dramatically. Replace rather than continue with a heavily spattered shroud — gas flow restriction causes porosity.
A. Yes — shroud bore diameter affects gas coverage at the weld pool. Larger bore shrouds provide more gas coverage but reduce visibility. For stainless steel and aluminium TIG welding, a larger gas cup is used. For MIG, standard shroud sizing matched to the torch is appropriate for most applications.
A. The contact tip bore must match the wire diameter in use — 0.6mm, 0.8mm, 1.0mm, or 1.2mm bore for the corresponding wire size. The shroud size is independent of the tip bore. Ensure the contact tip protrudes the correct distance inside the shroud — check the torch manual for tip setback guidance.
A. Yes — shroud pliers are specifically designed to twist off shrouds that have been welded by heavy spatter deposits. Using standard pliers risks damaging the torch body. Always use dedicated shroud pliers for stubborn shroud removal.
A. At minimum you need a welding helmet or headshield (auto-darkening recommended), leather welding gauntlets, a fire-resistant apron or jacket, and steel-toe boots. For enclosed spaces, a fume extractor or respirator is essential. A welding curtain or screen protects bystanders from UV flash. Keep a fire extinguisher accessible.
A. Yes — UK stocked for fast despatch. Check availability at PartsForMachines.com. Orders placed before the daily cut-off are dispatched same or next working day. Check the product page for current delivery estimates.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
