Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 3 working days |
| Next Day | £17.95 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
Product Number: 01062
The Draper 01062 induction coil. 1 x Induction Heater Coolant, 3L. Compatible across the draper induction, draper welding range — check product specifications for exact model fit. Also known as induction heating coil or induction heater accessory in welding supplies catalogues.
Additional Information:
Content: 1 x Induction Heater Coolant, 3L
About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 08169 | 09699 | 02676 | 02711 | 05015 |
A. The Draper 01062 is designed for use with Draper induction heater. Always confirm coil compatibility with your specific machine model before ordering — incorrect coils reduce heating efficiency and may not fit the machine's output connector.
A. Induction coils direct the alternating magnetic field from the induction unit to heat ferrous metal components. Common applications include bolt removal (heating rusted fasteners to break corrosion), panel straightening (heating and quenching to release distortion), bearing removal, and heat shrinking of interference-fit components.
A. Choose coil profile based on the component geometry. Straight coils suit flat surfaces and bolts. Inclined coils access fasteners at an angle. Side coils target the side faces of components. Flex coils adapt to curved surfaces. Pad coils provide broad heat distribution on flat areas.
A. Never touch the coil or workpiece during or immediately after heating. The workpiece reaches high temperatures quickly — use appropriate PPE including heat-resistant gloves. Keep combustible materials away from the work area. Do not use induction heaters near fuel tanks or combustible liquids.
A. Position the coil as close as possible without touching — typically 5–15mm from the target surface. Maintaining close proximity maximises heat transfer efficiency. The coil itself does not heat up significantly, but the induced eddy currents generate intense heat in the ferrous workpiece.
A. Induction heating works on ferrous metals only (mild steel, cast iron). It does not heat aluminium, copper, or non-ferrous materials. Stainless steel can be heated but less efficiently than mild steel due to lower magnetic permeability.
A. Replace the coil if the winding shows physical damage (kinks, cracking, abrasion through the insulation), if heating efficiency has noticeably reduced, or if the coil fails to connect securely to the machine output terminal.
A. The Draper 01062 is designed for Draper induction heater. Coil connectors and specifications vary between manufacturers — always verify connector type and impedance match before using a coil on a different brand machine.
A. At minimum you need a welding helmet or headshield (auto-darkening recommended), leather welding gauntlets, a fire-resistant apron or jacket, and steel-toe boots. For enclosed spaces, a fume extractor or respirator is essential. A welding curtain or screen protects bystanders from UV flash. Keep a fire extinguisher accessible.
A. Yes — the Draper 01062 is UK stocked for fast despatch. Check current availability at PartsForMachines.com.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
