Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Wet environments are where standard hose clips quietly fail - corrosion locks the screw, pits the band and ends any chance of re-tensioning the joint.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGS70BP adds the JCS details that make that reliable - a 50-70mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 6.0 Nm (54 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
The bulk box of 5 puts one corrosion-proof specification across the whole site - every component 18/8 (EN 1.4301) 304 stainless, salt mist tested, with Lloyd's Register Type Approval for marine, offshore and industrial service. JCS stainless clips are used across pumping, stormwater, wastewater treatment and irrigation plant.
Also available - the same clip as a retail carton (HGS70RP); the same clip as a trade bag (HGS70BG); the 45-60mm size (HGS60BP); the 60-80mm size (HGS80BP).
Lloyd's Register Type Approval on a stocked bulk pack is rare at any price point.
| Adjustment Range | 50-70mm (approx 1 15/16 - 2 3/4 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGS70BG | HGS70RP | HGS60BG | HGS50BP | HGS55BG |
| Material | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 50-70mm | 50-70mm | 45-60mm | 35-50mm | 40-55mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 | 304 |
| Pack Qty | 5 | 10 | 5 | 10 | 5 |
A. This size spans 50-70mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 50-70mm and the HGS70BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 1 15/16 to 2 3/4 in, covering common 2 and 2 1/2 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes. It is made from 18/8 marine-quality 304 stainless steel and holds Lloyd's Register Type Approval for marine, offshore and industrial use - JCS describes it as ideal for salt water and other highly corrosive environments.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 5 clips, all 50-70mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
