Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
For trade users fitting clips around water every week, stainless throughout is the only specification that lasts.
This is the 50-70mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 6.0 Nm (54 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Packed as a carton of 5 for the counter and the toolbox, it carries the full stainless specification - every component 18/8 (EN 1.4301) stainless steel with Lloyd's Register Type Approval - for hose joints in wet, corrosive and saltwater service from boats to washdown bays.
Also available - the same clip as a retail carton (HGS70RP); the same clip as a bulk pack (HGS70BP); the 45-60mm size (HGS60BG); the 60-80mm size (HGS80BG).
An industry-standard marine clip, sized by honest adjustment ranges and backed by over 180 years of British manufacturing.
| Adjustment Range | 50-70mm (approx 1 15/16 - 2 3/4 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 30-40mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS40PM1 (5 Pack)
£10.99
£10.67
3% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGS70RP | HGS80BG | HGS70BP | HGS45PM1 | HGS40PM1 |
| Material | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 50-70mm | 60-80mm | 50-70mm | 35-45mm | 30-40mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 | 304 |
| Pack Qty | 10 | 10 | 5 | 5 | 5 |
A. It adjusts between 50-70mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 50-70mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 15/16 to 2 3/4 in, covering common 2 and 2 1/2 in hose sizes.
A. For this size band JCS publishes a recommended torque of 6.0 Nm (54 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. Hi-Grip 304 stainless is marine-quality 18/8 steel with Lloyd's Register Type Approval and is suited to saltwater service. JCS also makes a 316 grade for maximum corrosion resistance in the most demanding marine, offshore, food and pharmaceutical settings - contact us if your application is in that category.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 5 clips, all 50-70mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
