Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Around water - pumped, sprayed or salt-laden - clip corrosion is the failure mode; the cure is marine-quality stainless in every component.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGS16BG adds the JCS details that make that reliable - an 11-16mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 3.0 Nm (26 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
Built from 18/8 marine-quality 304 stainless steel (EN 1.4301), it holds Lloyd's Register Type Approval for marine, offshore and industrial use. JCS stainless clips are used across water and drainage plant - pumping solutions, stormwater and overflow systems, wastewater treatment and irrigation networks. Size by the fitted outside diameter of the hose and seat the clip centrally over the barb.
Also available - the same clip as a retail carton (HGS16RP); the same clip as a bulk pack (HGS16BP); the 9.5-12mm size (HGS12BG); the 35-50mm size (HGS50BG).
All-stainless construction verified by salt mist testing - made and batch-tested in-house in Sudbury, Suffolk under ISO 9001:2015.
| Adjustment Range | 11-16mm (approx 7/16 - 5/8 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 3.0 Nm (26 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS16RP | HGS16BP | HGS12BG | HGS50BG |
| Material | Stainless steel | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 11-16mm | 11-16mm | 9.5-12mm | 35-50mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 |
| Pack Qty | 10 | 10 | 5 | 5 |
A. It adjusts between 11-16mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 11-16mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 7/16 to 5/8 in, covering common 1/2 and 5/8 in hose sizes.
A. For this size band JCS publishes a recommended torque of 3.0 Nm (26 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 50 clips, all 11-16mm adjustment range. Other pack formats of the same clip are listed separately.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
