Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Production lines, hire fleets and maintenance stores burn through hose clips - and learn fast which ones never come back on a warranty job.
The HGZ55BP is a Hi-Grip worm drive clip adjusting between 40-55mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 6.0 Nm (54 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
This is trade depth in one box - 10 clips of one size, zinc plated and passivated over mild steel with the plating applied after cutting. Intended for non-corrosive domestic, automotive and industrial service; for wet or salty duty JCS points buyers to its stainless range. One Hi-Grip covers a wider span than a typical nut-and-bolt clamp, so fewer bins cover more hoses.
Also available - the same clip as a retail carton (HGZ55RP); the same clip as a trade bag (HGZ55BG); the 35-50mm size (HGZ50BP); the 45-60mm size (HGZ60BP).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 40-55mm (approx 1 9/16 - 2 3/16 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGZ55RP | HGZ55BG | HGZ60RP | HGZ45RP | HGZ50RP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 40-55mm | 40-55mm | 45-60mm | 35-45mm | 35-50mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Pack Qty | 10 | 5 | 10 | 10 | 10 |
A. It adjusts between 40-55mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 40-55mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 9/16 to 2 3/16 in, covering common 1 3/4 and 2 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. No - JCS itself cautions that zinc-coated clamps can quickly corrode or seize around salt water. The marine specification is Hi-Grip Stainless: 18/8 304 stainless throughout, with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. JCS recommends asking three questions: what is the hose carrying (water, fuel, chemicals, air)? What pressure and temperature will it see? And is the environment corrosive? The answers drive material choice - zinc plated for general non-corrosive use, stainless for corrosive environments - then match the clip's range to the fitted hose diameter.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 40-55mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
