Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ70BP
A hose that weeps at the joint wastes fluid, invites grime and eventually strands the machine it serves.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGZ70BP adds the JCS details that make that reliable - a 50-70mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 6.0 Nm (54 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
The bulk pack of 10 is the stores format for fleets, production and hire equipment running the same size across many machines. The clip itself is unchanged: heavily electro zinc plated and passivated mild steel, EN9227 tested, plated after cutting so even the band's cut edges are coated - for domestic, automotive and industrial duty in non-corrosive conditions.
Also available - the same clip as a retail carton (HGZ70RP); the same clip as a trade bag (HGZ70BG); the 45-60mm size (HGZ60BP); the 60-80mm size (HGZ80BP).
Designed, made and batch-tested in-house at Sudbury, Suffolk under ISO 9001:2015 - an everyday clip built to an approval list most premium clips cannot match.
| Adjustment Range | 50-70mm (approx 1 15/16 - 2 3/4 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ70RP | HGZ70BG | HGZ60BP | HGZ80BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 50-70mm | 50-70mm | 45-60mm | 60-80mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Pack Qty | 10 | 5 | 10 | 15 |
A. It adjusts between 50-70mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 50-70mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 15/16 to 2 3/4 in, covering common 2 and 2 1/2 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. The band is heavily electro zinc plated and passivated, tested to EN9227, and JCS plates the steel after cutting so the cut edges are coated too. It is intended for non-corrosive environments such as domestic and light industrial use - for wet, salty or chemical-exposed duty choose the Hi-Grip Stainless version.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 10 clips, all 50-70mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
