Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ80BP
Variations
Most hose failures start at the connection, not the hose - a clip that creeps loose under vibration lets the joint seep long before it lets go.
Sized to adjust between 60-80mm, the HGZ80BP carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 6.0 Nm (54 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Boxed as 15 clips for stores and production use, it carries JCS's general purpose specification - electro zinc plated and passivated mild steel tested to EN9227. JCS supplies leading agricultural machinery manufacturers, and the same clips serve workshop, fleet and light industrial pipework. Size each joint by the fitted outside diameter of the hose.
Also available - the same clip as a trade bag (HGZ80BG); the 50-70mm size (HGZ70BP); the 70-90mm size (HGZ90BP); a 304 stainless version in the same size and pack (HGS80BP).
Few clips at this level carry a Kitemark, NATO approval and 180-plus years of British manufacturing behind them.
| Adjustment Range | 60-80mm (approx 2 3/8 - 3 1/8 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 15 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ80BG | HGZ70BP | HGZ90BP | HGS80BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Stainless steel |
| Clamping Range | 60-80mm | 50-70mm | 70-90mm | 60-80mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | |||
| Pack Qty | 10 | 10 | 10 | 5 |
A. It adjusts between 60-80mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 60-80mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 2 3/8 to 3 1/8 in, covering common 2 1/2 and 3 in hose sizes.
A. For this size band JCS publishes a recommended torque of 6.0 Nm (54 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. JCS recommends asking three questions: what is the hose carrying (water, fuel, chemicals, air)? What pressure and temperature will it see? And is the environment corrosive? The answers drive material choice - zinc plated for general non-corrosive use, stainless for corrosive environments - then match the clip's range to the fitted hose diameter.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 15 clips, all 60-80mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
