Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 8080MFB35-45
Variations
With a rated maximum load of 407.0 kg with a generous deflection of 20.50 mm, the 8080MFB35-45 is an 80 x 80 mm Male Flat Buffer threaded M14 x 35 and moulded in 45 Shore A rubber, the softest grade in this flat-buffer geometry. That combination of relatively moderate load capacity and high deflection travel makes it the natural choice where vibration isolation takes priority over load restraint, giving lighter or dynamically sensitive equipment the compliance it needs to absorb low-frequency excitation before it reaches the supporting structure. Rubber-to-metal bonded construction delivers reliable, long-service energy absorption without supplementary fixings or complex installation. The flat-faced male stud design mounts simply against any mating surface, acting either as a direct elastic contact element or as a secondary shock cushion between a moving component and the machine chassis. At 45 Shore A, the rubber yields readily under load, maximising the deflection stroke and providing the isolation efficiency that stiffer grades cannot match at equivalent displacements. Custom options, including oil-resistant and high-temperature rubbers and stainless steel metalwork, are available on request. Suitable across a wide band of mainstream general-machinery applications, the 8080MFB35-45 serves construction equipment, agricultural machinery, industrial plant, commercial vehicles, and elevators where protecting sensitive systems, reducing transmitted vibration, and extending machinery service life are the governing requirements. It is equally applicable in power generation, marine, railway and mass-transit, and automotive contexts.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 45 |
|---|---|
| Body diameter D (mm) / Overall height H (mm) | 80 x80 |
| Stud thread d | M14 |
| Stud length L (mm) | 35 |
| Max load (kg) | 407 |
| Deflection (mm) | 20.5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 7555MFB37-45 | 5015MFB25-60 | 8080FFB14-45 | 7050FFB10-45 | 7050FFB12-45 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 55mm | 15mm | 80mm | 50mm | 50mm |
| Size | 75x55mm | 50x15mm | 80x80mm | 70x50mm | 70x50mm |
| Deflection | 13.76 | 3.8 | 20 | 12.5 | 12.5 |
| Diameter | 75mm | 50mm | 80mm | 70mm | 70mm |
| Diameter Range | 51-100mm | 26-50mm | 51-100mm | 51-100mm | 51-100mm |
| Length Range | 51-100mm | 11-25mm | 51-100mm | 26-50mm | 26-50mm |
| Shore Hardness | 45 | 60 | 45 | 45 | 45 |
| Thread | M12 | M10 | M14 | M10 | M12 |
| Show More | |||||
A. The buffer measures 80 x 80 mm (D x H) with an M14 x 35 mm male stud. Maximum load is 407.0 kg and deflection is 20.50 mm.
A. At 45 Shore A, this is the softest grade in the 80 x 80 mm Male Flat Buffer range. Softer rubber gives greater deflection and better vibration isolation at lower loads, making it the correct choice where isolation efficiency matters more than load restraint — particularly for lighter or dynamically sensitive equipment subject to low-frequency vibration.
A. The buffer is suited to construction equipment, industrial machinery, agricultural equipment, commercial vehicles, and elevators. It also serves power generation, marine, railway and mass-transit, automotive, and military and defence applications where vibration absorption and impact cushioning are required.
A. The rubber-to-metal bonded construction absorbs and dissipates energy when a moving component contacts the flat face. It can act as a direct elastic element in contact with a surface or as a secondary cushion between components, reducing transmitted impact force, protecting surrounding structures, and improving operator comfort.
A. Yes. Stainless steel metalwork and oil-resistant or high-temperature rubber compounds, along with additional and custom sizes, are available on request.
A. Yes. The same 80 x 80 mm geometry is available in 60 Shore A (8080MFB35-60) and 70 Shore A (8080MFB35-70) for applications requiring higher load capacity or reduced deflection. Additional sizes in the family include 0808MFB06, 100100MFB44, 10030MFB41, 10040MFB44, 10050MFB41, and 10055MFB44.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
