Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7040MFB37-60
Variations
With a rated maximum load of 737 kg with a controlled deflection of 10 mm, the 7040MFB37-60 is a 70 x 40 mm Male Flat Buffer with an M12 x 37 mm stud, bonded in 60 Shore A natural rubber, a medium hardness that positions this mount squarely at the broad middle ground of industrial shock and vibration management. Where lighter grades prioritise isolation and softer deflection, and firmer grades are reserved for extreme restraint duty, 60 Shore A balances meaningful load-carrying capacity with sufficient compliance to absorb and dissipate energy from a wide spectrum of machinery running conditions. The rubber-to-metal bonded construction gives the flat buffer its combination of structural integrity and elastic response. The low-profile flat face works either as a secondary stop, cushioning impact from an approaching moving component. Or as a direct-contact elastic element between a machine and a mounting surface. This dual-mode capability, combined with straightforward stud-mount installation, makes the format practical across a broad range of applications without specialist tooling or preparation. At 60 Shore A, this buffer is well suited to general industrial machinery, agricultural equipment, commercial vehicles, and construction plant where loads are sustained and moderate-to-heavy, but where some degree of vibration isolation and operator comfort improvement remains a design objective. The mount may be loaded in compression, shear, or a combination of both. Industries served by this geometry include power generation, marine, automotive, railway and mass transit, and military and defence applications.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 40 |
| Stud thread d | M12 |
| Stud length L (mm) | 37 |
| Max load (kg) | 737 |
| Deflection (mm) | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Male Flat Buffer - Anti-Vibration, Thread Size M12, Max Load 737Kg - 7550MFB37-60
£15.64
£15.33
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 7040FFB10-60 | 7040FFB12-60 | 8040FFB14-45 | 7550MFB37-60 | 5021FFB10-70 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 40mm | 40mm | 40mm | 21mm | |
| Height | 50mm | ||||
| Size | 70x40mm | 70x40mm | 80x40mm | 75x50mm | 50x21mm |
| Deflection | 10 | 10 | 10 | 12.5 | 5 |
| Diameter | 70mm | 70mm | 80mm | 50mm | |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 26-50mm | |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 11-25mm | |
| Shore Hardness | 60 | 60 | 45 | 70 | |
| Thread | M10 | M12 | M14 | M12 | M10 |
| Show More | |||||
A. The buffer measures 70 mm in diameter by 40 mm in height, with an M12 x 37 mm male stud. Maximum load is 737 kg and deflection is 10 mm.
A. This buffer is bonded in 60 Shore A rubber, a medium hardness. It delivers a balance between load-carrying capacity and elastic compliance, making it suitable for the broad middle ground of machinery mounting where both support and vibration absorption are required.
A. It is designed for general industrial machinery, agricultural equipment, commercial vehicles, and construction plant. It also serves power generation, marine, automotive, railway and mass transit, and military and defence applications.
A. The rubber-to-metal bonded construction absorbs and dissipates energy. The flat face can act as a secondary stop cushioning impact from a moving component, or as a direct-contact elastic element between a machine body and a mounting surface. It may be loaded in compression, shear, or a combination of both.
A. Yes. The 70 x 40 mm Male Flat Buffer is also available in 45 Shore A (SKU 7040MFB37-45) and 70 Shore A (SKU 7040MFB37-70), allowing selection to suit lighter isolation duties or heavier shock-restraint requirements.
A. Yes. Custom sizes, stainless steel metalwork, and oil-resistant or high-temperature rubber compounds are available on request.
A. We accept all major credit and debit cards, along with PayPal.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
