Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Rated at a maximum load of 690 kg with a controlled deflection of just 4.0 mm, the Male Flat Buffer 5018MFB25-70 is the firm-grade choice within the 50×18 mm Male Flat Buffer range, engineered for applications where heavy loads, shock forces, and positional restraint demand minimal movement. The 70 Shore A rubber compound delivers high resistance to compression, making it well suited to equipment that must absorb impact energy without yielding significantly under load. Rubber-to-metal bonded construction ensures reliable energy absorption and structural integrity throughout the working life of the mount. The flat buffer geometry is designed for low-cost shock and vibration absorption, easy installation, and direct elastic contact with a surface, reducing impact force transmitted from a secondary moving component. At this hardness grade, the mount performs best where load rather than isolation is the primary requirement, carrying higher loads with less movement than softer grades of the same geometry. At 50 mm diameter and 18 mm height, with an M10×25 male stud, this buffer is suited to heavier-duty installations across construction equipment, industrial machinery, commercial vehicles, agricultural equipment, and elevators. Industries including construction and off-highway, power generation, marine, railway and mass transit, and military and defence rely on flat buffers of this type to protect surrounding structures, extend machinery lifespan, and improve operator comfort where shock and impact loads are a design consideration. Custom options including stainless steel hardware and oil-resistant or high-temperature rubbers are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) / Overall height H (mm) | 50 x18 |
| Stud thread d | M10 |
| Stud length L (mm) | 25 |
| Max load (kg) | 690 |
| Deflection (mm) | 4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 6025FFB10-60 | 6035FFB10-60 | 5020MFB28-70 | 5021MFB25-70 | 6025MFB25-60 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 25mm | 20mm | 21mm | 25mm | |
| Height | 35mm | ||||
| Size | 60x25mm | 50x20mm | 50x21mm | 60x25mm | |
| Deflection | 6.25 | 6.25 | 5 | 5.3 | 6.3 |
| Diameter | 60mm | 50mm | 50mm | 60mm | |
| Diameter Range | 51-100mm | 26-50mm | 26-50mm | 51-100mm | |
| Length Range | 11-25mm | 11-25mm | 11-25mm | 11-25mm | |
| Shore Hardness | 60 | 70 | 70 | 60 | |
| Thread | M10 | M10 | M10 | M10 | M10 |
| Show More | |||||
A. This buffer has a maximum load rating of 690.0 kg and a controlled deflection of 4.0 mm, making it the firmest option in the 50×18 mm Male Flat Buffer range.
A. At 70 Shore A, this is a firm-grade rubber compound. It carries higher loads with less movement compared to softer grades of the same geometry, and is best suited to applications where load capacity, shock resistance, and positional restraint are the primary requirements rather than vibration isolation.
A. The buffer measures 50 mm in diameter and 18 mm in height. The male stud is M10×25.
A. Male flat buffers of this type are used across construction equipment, industrial machinery, agricultural equipment, commercial vehicles, and elevators. Industries served include construction and off-highway, agriculture, power generation, marine, railway and mass transit, automotive, and military and defence.
A. Male flat buffers absorb and dissipate energy from impact shocks, reducing the force transmitted from a secondary moving object or acting as an elastic element in direct contact with a surface. Rubber-to-metal bonded construction maintains structural integrity during repeated loading.
A. Yes — the same 50×18 mm geometry is available in 45 Shore A (5018MFB25-45) for greater deflection and softer isolation, and 60 Shore A (5018MFB25-60) for a mid-range balance of load and isolation. Choose the 70 Shore A (5018MFB25-70) for maximum load capacity and minimal movement.
A. Yes — stainless steel hardware and oil-resistant or high-temperature rubber compounds, as well as additional and custom sizes, are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
