Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7040MM37-70
Variations
Where machinery demands maximum load restraint and minimal movement, the 70 Shore A male-male bobbin mount 7040MM37-70 delivers a rated capacity of 357.0 kg with a deflection of just 3.4 mm, figures that place it at the upper end of the 70 x 40 mm range and make it the correct specification when softer grades would allow unacceptable movement under heavy or shock loading. The mount measures 70 mm in diameter by 40 mm high, with M12 threaded studs on a 37 mm stud length, and is suitable for loading in shear, compression, or a combination of both. Rubber-to-metal bonded construction gives the mount its structural integrity across demanding duty cycles. At 70 Shore A, the rubber compound is formulated to carry high loads with the least deflection in the range, making it well suited to applications where the mounted component must be held firmly against shock, impact, or sustained heavy vibration rather than isolated through large movement. Stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request for environments that demand enhanced material specification. Typical applications for this upper-range, firm-grade mount include diesel engine installations, generator sets, industrial machinery and equipment, and heavy-duty exhaust mountings where vibration must be attenuated without compromising positional stability. Industries served include power generation, construction and off-highway, agriculture, marine, and automotive. The mount may also be specified for military and defence, railway and mass transit, and similar sectors requiring assured load restraint under dynamic conditions.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 40 |
| Stud thread d | M12 |
| Stud length L (mm) | 37 |
| Max load (kg) | 357 |
| Deflection (mm) | 3.4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | PR757040-70 | 6535FF12-70 | 7040MF25-70 | 7040MF37-70 | 10045FF16-45 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 35mm | 40mm | 40mm | 45mm | |
| Size | 75mm | 65x35mm | 70x40mm | 70x40mm | 100x45mm |
| Deflection | 3 | 3.4 | 3.4 | 3.7 | |
| Diameter | 65mm | 70mm | 70mm | 100mm | |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 51-100mm | |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | |
| Shore Hardness | 70 | 70 | 70 | 70 | 45 |
| Size Range | 51-100mm | ||||
| Thread | M12 | M12 | M10 | M12 | M16 |
| Show More | |||||
A. The mount has an outer diameter of 70 mm and a height of 40 mm, with M12 threaded studs on a 37 mm stud length. The maximum rated load is 357.0 kg and the deflection under load is 3.4 mm.
A. At 70 Shore A, this is the firmest grade in the 70 x 40 mm male-male range. Harder rubber carries higher loads with less movement, making it appropriate where the mounted component must be restrained firmly against shock, impact, or sustained heavy vibration rather than allowed to deflect freely.
A. The mount may be loaded in shear, compression, or a combination of both, providing flexibility in how it is oriented within a machine structure.
A. Typical applications include diesel engines, generator sets, industrial machinery and equipment, and heavy-duty exhaust mountings. Industries served include power generation, construction and off-highway, agriculture, marine, automotive, military and defence, and railway and mass transit.
A. Yes — the same 70 x 40 mm male-male bobbin mount is available in 45 Shore A (SKU 7040MM37-45) for greater deflection and softer isolation, and 60 Shore A (SKU 7040MM37-60) as a general-purpose mid-grade option.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request for applications in corrosive, oily, or elevated-temperature environments.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
