Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 6025MM25-70
Engineered for heavy-duty restraint and shock absorption, the 6025MM25-70 is a 60x25mm male-male bobbin mount rated to a maximum load of 314.0 kg with a minimal deflection of just 2.0 mm, figures that place it firmly at the upper end of this geometry's load-bearing range. The M10x25 threaded stud configuration allows direct, secure fixing to both mounting surfaces, making installation straightforward across many industrial and mobile plant applications. At 70 Shore A, the rubber element is formulated to hold firmly under load rather than yield, which is precisely the behaviour required where equipment must be constrained against movement, surge or impact. The rubber-to-metal bonded construction provides structural integrity across the full loading cycle, whether the mount is subjected to shear, compression or a combination of both forces simultaneously. This grade is the appropriate choice when isolation of sensitive components is secondary to the need for positive location and load control. Application contexts where the 6025MM25-70 excels include diesel engine mountings on generator sets and off-highway plant, exhaust system brackets on heavy machinery, and industrial equipment installations in construction, agriculture, power generation and marine environments. Where shock and impact loading are routine rather than occasional, the 70 Shore A hardness grade delivers the controlled deflection and load capacity that lower-Shore alternatives cannot match. This mount is available in 45 Shore A (6025MM25-45) and 60 Shore A (6025MM25-60) variants of the same 60x25mm geometry for applications requiring greater deflection or enhanced low-load isolation.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 60 |
| Overall height H (mm) | 25 |
| Stud thread d | M10 |
| Stud length L (mm) | 25 |
| Max load (kg) | 314 |
| Deflection (mm) | 2 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 7035FF10-60 | 7035FF12-60 | 7045MM25-70 | 7045MM37-70 | 7030MM25-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 35mm | 35mm | 45mm | 45mm | 30mm |
| Size | 70x35mm | 70x35mm | 70x45mm | 70x45mm | 70x30mm |
| Deflection | 2.9 | 2.9 | 3.9 | 3.9 | 2.4 |
| Diameter | 70mm | 70mm | 70mm | 70mm | 70mm |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 51-100mm | 51-100mm |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Shore Hardness | 60 | 60 | 70 | 70 | 60 |
| Thread | M10 | M12 | M10 | M12 | M10 |
| Show More | |||||
A. The 6025MM25-70 is rated to a maximum load of 314.0 kg, making it the highest-load option in the 60x25mm male-male bobbin geometry range.
A. The 6025MM25-70 has a deflection of 2.0 mm at maximum load. This minimal movement is a characteristic of the 70 Shore A hardness grade, which prioritises load control and firm restraint over deflection-based isolation.
A. Shore A hardness indicates the stiffness of the rubber element. At 70 Shore A, this is a firm grade: it carries higher loads with less movement than softer grades. It is suited to applications requiring positive location, shock resistance and restraint rather than maximum vibration isolation.
A. The 6025MM25-70 uses M10 threaded studs with a length of 25 mm on each end, as indicated by the d x L specification of M10 x 25.
A. This mount is suited to diesel engines, generator sets, exhaust mountings, air-conditioning units, industrial machinery and equipment. Industries served include construction and off-highway, agriculture, power generation, marine, railway and mass transit, automotive, and military and defence.
A. Yes. The rubber-to-metal bonded construction allows the 6025MM25-70 to be loaded in shear, compression or a combination of both, providing flexibility in mounting orientation.
A. Yes. The same body size and thread configuration is available in 45 Shore A (SKU: 6025MM25-45) for greater deflection and lower-load isolation, and 60 Shore A (SKU: 6025MM25-60) as a general-purpose intermediate grade.
A. Yes. Stainless steel metal components and oil-resistant or high-temperature rubber compounds are available on request, as are additional and custom sizes.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
