Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 6030MF25-45
Soft at 45 Shore A, this 60x30mm male-female bobbin mount is engineered specifically for installations where maximum vibration isolation takes priority, yielding up to 2.5mm deflection under its rated 111kg maximum load. That generous movement under load makes it the right choice for lighter or vibration-sensitive equipment where absorbing low-frequency disturbance matters more than rigid restraint, and where protecting delicate instruments, surrounding structures, or operator comfort is a primary concern. Rubber-to-metal bonded construction gives the mount mechanical integrity across shear, compression, or combined loading orientations. Both male (M10 x 25mm stud) and female (M10 thread) interfaces are incorporated in a single body, simplifying installation between mating faces without additional hardware. The soft rubber compound delivers the greater deflection characteristic of lower Shore grades, translating directly into superior isolation efficiency at the moderate loads this unit is rated to carry. With a body diameter of 60mm and a height of 30mm, this upper-range standard-load bobbin suits applications including air-conditioning units, exhaust mountings, instruments, and industrial machinery and equipment. It is equally at home in generator sets, agricultural plant, marine installations, and automotive assemblies where controlled compliance is preferred over stiffness. Industries spanning construction and off-highway, power generation, railway and mass transit, and military and defence all make use of mountings of this type. This mount is available in 60 Shore A (6030MF25-60) and 70 Shore A (6030MF25-70) variants for higher-load or lower-deflection requirements within the same body geometry.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 45 |
|---|---|
| Body diameter D (mm) | 60 |
| Overall height H (mm) | 30 |
| Stud thread d1 | M10 |
| Stud length L (mm) | 25 |
| Diameter / thread d2 (mm) | M10 |
| Max load (kg) | 111 |
| Deflection (mm) | 2.5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Anti-Vibration Mount - Male - Male Bobbin Range, M10, Max Load 110Kg - 5035MM25-60
£13.85
£13.58
2% OFF
|
Anti-Vibration Mount - Male - Female Bobbin Range, M10, Max Load 113Kg - 5035MF25-60
£13.85
£13.58
2% OFF
|
|||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 5035MM25-60 | 4020MF23-70 | 4020MF25-70 | 5035MF25-60 | 5050FF10-70 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 20mm | 20mm | 50mm | ||
| Height | 35mm | 35mm | |||
| Size | 50x35mm | 40x20mm | 40x20mm | 50x35mm | 50x50mm |
| Deflection | 3 | 1.6 | 1.6 | 3 | 4.5 |
| Diameter | 40mm | 40mm | 50mm | ||
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | ||
| Length Range | 11-25mm | 11-25mm | 26-50mm | ||
| Mount Dimension | 50mm | 50mm | |||
| Shore Hardness | 70 | 70 | 70 | ||
| Thread | M10 | M8 | M10 | M10 | M10 |
| Show More | |||||
A. The mount body measures 60mm diameter by 30mm height. The male stud is M10 with a 25mm length (d1 x L: M10 x 25) and the female thread is M10 (d2: M10).
A. The 6030MF25-45 is rated to a maximum load of 111kg and provides up to 2.5mm deflection under load — the highest deflection in the 60x30mm range, reflecting the soft 45 Shore A compound.
A. The soft 45 Shore A grade is best suited to lighter or vibration-sensitive equipment where isolation efficiency is the priority. Typical applications include air-conditioning units, exhaust mountings, instruments, and industrial machinery and equipment.
A. The mount may be used in shear, compression, or a combination of both loading orientations, giving flexibility in installation across a range of mounting configurations.
A. Yes — the same body geometry is available in 60 Shore A (6030MF25-60) and 70 Shore A (6030MF25-70). Harder grades carry higher loads with less movement; the 45 Shore A grade here provides the greatest deflection and isolation within the range.
A. Yes — stainless steel fittings, oil-resistant rubber, and high-temperature rubber compounds, as well as additional and custom sizes, are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
