Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Rated at a maximum load of 117 kg with a controlled deflection of just 4.0 mm, the 5045MF28-70 is the firm-grade choice in the 50x45mm male-female bobbin mount range, built for installations where restraint, shock resistance, and minimal movement under load are the governing requirements. The rubber-to-metal bonded construction carries an M10 x 28 mm male stud (d1) and M10 female thread (d2), enabling direct substitution or new installation across a wide variety of industrial and mobile plant applications. The 70 Shore A rubber compound delivers the highest stiffness in this geometry's Shore range, making it the preferred selection where vibration isolation is secondary to positional control and load retention. Mounts of this grade are suitable for use in shear, compression, or a combination of both loading modes, giving the engineer flexibility in orientation without sacrificing the firmness characteristic that defines the grade. Typical applications well matched to this mount's load and stiffness profile include diesel engine installations on generator sets, heavy industrial machinery and equipment requiring secure positional restraint, agricultural plant, and construction and off-highway machinery where road shock and operational impact loads demand a mount that holds its position. The 50x45mm body size and standard M10 fixings make it a practical fit across mainstream machinery formats without recourse to custom hardware. This 70 Shore A variant sits at the firm end of the 5045MF28 family. Softer isolation grades are also available: 45 Shore A (SKU 5045MF28-45) and 60 Shore A (SKU 5045MF28-60).
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 50 |
| Overall height H (mm) | 45 |
| Stud thread d1 | M10 |
| Stud length L (mm) | 28 |
| Diameter / thread d2 (mm) | M10 |
| Max load (kg) | 117 |
| Deflection (mm) | 4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 6540MF37-45 | 7060MF37-45 | 7060FF12-45 | 7560FF12-45 | 5035FF10-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 40mm | 60mm | 60mm | 60mm | |
| Height | 35mm | ||||
| Size | 65x40mm | 70x60mm | 70x60mm | 75x60mm | 50x35mm |
| Deflection | 3.5 | 5.4 | 5.4 | 5.2 | 3 |
| Diameter | 65mm | 70mm | 70mm | 75mm | |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 51-100mm | |
| Length Range | 26-50mm | 51-100mm | 51-100mm | 51-100mm | |
| Shore Hardness | 45 | 45 | 45 | 45 | |
| Thread | M12 | M12 | M12 | M12 | M10 |
| Show More | |||||
A. This mount is rated to a maximum load of 117.0 kg with a deflection of 4.0 mm, reflecting the high-stiffness characteristic of the 70 Shore A rubber grade.
A. The mount features an M10 x 28 mm male stud (d1 x L) on one end and an M10 female thread (d2) on the other, giving a male-female configuration for direct through-bolted or stud-mount installation.
A. 70 Shore A is the firmest grade available in this 50x45mm geometry. It carries higher loads with less movement compared to softer grades, making it suitable for applications requiring positional restraint and resistance to shock and impact rather than maximum vibration isolation.
A. The 5045MF28-70 may be loaded in shear, compression, or a combination of both, providing installation flexibility across different mounting orientations.
A. Applications include diesel engines, generator sets, industrial machinery and equipment, agricultural plant, and construction and off-highway machinery. The mount also suits air-conditioning units, exhaust mountings, and marine or railway installations where firm restraint is required.
A. Yes — the same 50x45mm M10 body is available in 45 Shore A (SKU 5045MF28-45) for softer isolation and 60 Shore A (SKU 5045MF28-60) for a mid-stiffness option. The broader range also includes larger body sizes: 100100MF44, 10050MF44, 10055MF44, 10060MF44, 10075MF44, and 1008MF10.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request, along with additional and custom sizes.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
