Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 5025MF20-60
The 5025MF20-60 is a 50 x 25 mm male-female bobbin mount in 60 Shore rubber, rated to 151 kg. It is a low-cost route to cutting vibration and shock on general-purpose industrial equipment.
Loading can be in compression, in shear, or a combination of both, and different thread variations are produced across the range. This size carries a male stud one end and a female thread the other, for applications where a bolt fixing is required: M10 thread with a 20 mm stud, on a 50 mm diameter body 25 mm high. Maximum load is 151 kg at 2 mm deflection. Stainless steel metals and oil-resistant or high-temperature rubber compounds are available on request.
This size is offered in this grade; neighbouring sizes in the range cover lighter and heavier duties.
| Mount Dimension (D) | 50mm |
|---|---|
| Height (H) | 25mm |
| Thread size (V) | M10 |
| Bolt Length (I) | 20mm |
| Max Load (Kg) | 151 |
| Deflection (mm) | 2 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Rubber Bobbin Mounts: Hanging Loads, Snapped Studs and Oil Rot A generator box hung off rubber bobbins, a stud snapped at the nut, or mounts gone soft and squat under a leaking engine: small bobbin mounts tend to fail for...
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 5025MF25-60 | 5035MM25-70 | 7035MM25-45 | 7540MM37-45 | 7550FF12-45 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 25mm | 35mm | 35mm | 40mm | 50mm |
| Size | 50x25mm | 50x35mm | 70x35mm | 75x40mm | 75x50mm |
| Deflection | 2 | 3 | 2.9 | 3.4 | 4.4 |
| Diameter | 50mm | 50mm | 70mm | 75mm | 75mm |
| Diameter Range | 26-50mm | 26-50mm | 51-100mm | 51-100mm | 51-100mm |
| Length Range | 11-25mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Shore Hardness | 60 | 70 | 45 | 45 | 45 |
| Thread | M10 | M10 | M10 | M12 | M12 |
| Show More | |||||
A. 151 kg maximum at 2 mm deflection.
A. Yes - bobbin mounts can be used in shear or compression or a combination of both; they should not be put into tension.
A. We accept all major credit and debit cards, along with PayPal.
A. Fit is dimensional rather than machine-specific - match a 50 mm diameter body, 25 mm height and M10 thread against your equipment. Search by the AV part number or these dimensions to confirm suitability.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
