Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 5025MF20-60
The 5025MF20-60 is a 50 x 25 mm male-female bobbin mount in 60 Shore rubber, rated to 151 kg. It is a low-cost route to cutting vibration and shock on general-purpose industrial equipment.
Loading can be in compression, in shear, or a combination of both, and different thread variations are produced across the range. This size carries a male stud one end and a female thread the other, for applications where a bolt fixing is required: M10 thread with a 20 mm stud, on a 50 mm diameter body 25 mm high. Maximum load is 151 kg at 2 mm deflection. Stainless steel metals and oil-resistant or high-temperature rubber compounds are available on request.
This size is offered in this grade; neighbouring sizes in the range cover lighter and heavier duties.
| Mount Dimension (D) | 50mm |
|---|---|
| Height (H) | 25mm |
| Thread size (V) | M10 |
| Bolt Length (I) | 20mm |
| Max Load (Kg) | 151 |
| Deflection (mm) | 2 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Rubber Bobbin Mounts: Hanging Loads, Snapped Studs and Oil Rot A generator box hung off rubber bobbins, a stud snapped at the nut, or mounts gone soft and squat under a leaking engine: small bobbin mounts tend to fail for...
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 5025MF25-60 | 5035MM25-70 | 7035MM25-45 | 7540MM37-45 | 7550FF12-45 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 25mm | 35mm | 35mm | 40mm | 50mm |
| Size | 50x25mm | 50x35mm | 70x35mm | 75x40mm | 75x50mm |
| Deflection | 2 | 3 | 2.9 | 3.4 | 4.4 |
| Diameter | 50mm | 50mm | 70mm | 75mm | 75mm |
| Diameter Range | 26-50mm | 26-50mm | 51-100mm | 51-100mm | 51-100mm |
| Length Range | 11-25mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Shore Hardness | 60 | 70 | 45 | 45 | 45 |
| Thread | M10 | M10 | M10 | M12 | M12 |
| Show More | |||||
A. 151 kg maximum at 2 mm deflection.
A. Yes - bobbin mounts can be used in shear or compression or a combination of both; they should not be put into tension.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
