Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Solvent-based washers use petroleum-based cleaning fluids — strong oil-and-grease removal, fast cleaning, but require ventilation and have flash-point handling considerations. Aqueous washers use water-based detergent solutions — slower cleaning but no fumes, no flash-point concern, and easier waste disposal in many UK trade settings. Modern workshops typically use aqueous for routine cleaning and solvent only where heavy contamination demands it. Match the washer's fluid compatibility to the cleaning task.

Match the working surface and tank capacity to the typical components cleaned. For small components (carburettors, brake calipers, light bearings), 30-50 litre bench-top units are sufficient. For mid-sized components (transmissions, large bearings, engine sub-assemblies), 60-100 litre free-standing units. For full engine and gearbox cleaning, 100-150+ litre large-capacity units with reinforced trolley bases. The capacity and working surface dimensions are listed on every product page.

Ultrasonic cleaners use high-frequency sound waves transmitted through cleaning fluid to dislodge contamination from the surface and recesses of components — excellent for fine-detail and hard-to-reach internal cleaning (carburettor jets, fuel-injector internals, machined surface finishing). Capacity is typically 5-30 litres for trade-shop ultrasonic units. Match the working-tank dimensions to the components being cleaned. Ultrasonic doesn't replace solvent or aqueous washers for bulk cleaning — it complements them.

Yes. Replacement circulating pumps (matched by the washer model), replacement cleaning brushes (the manual scrub brushes plumbed into the wash circuit), replacement drain-tray and lid components, and the matching cleaning fluids (solvent and aqueous formulations) are available across the SIP, Sealey, and Draper parts washer ranges. Search by the washer model code, or WhatsApp 07754288583 with a photograph for cross-reference.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Parts Washers

FilterFilters
View as Grid List

Within Vehicle Workshop Equipment, Parts Washers covers the workshop cleaning units used to remove oil, grease, swarf, and contamination from mechanical parts during service and rebuild work — covering bench-top parts washers, free-standing parts washers, large-capacity solvent and aqueous-cleaning units, ultrasonic cleaning baths, and the matching cleaning fluids and replacement parts used in workshop component cleaning.

Parts for Machines supplies parts washers across the trade and professional ranges, covering both compact bench-top units (suited to occasional use and small-component cleaning) and the larger floor-standing parts washers used in daily workshop service operations.

We are an authorised distributor and seller of SIP, Sealey, and Draper across the parts washer range. SIP and Sealey lead the line — covering trade-grade parts washers with electric-pumped circulation, integrated cleaning brushes, drain trays, and adjustable working surfaces. Draper extends the range with workshop and home-shop variants at competitive trade pricing.

Product pages list the washer type (bench-top, free-standing, ultrasonic), the working capacity in litres (typical 30-120 litres for bench and free-standing units), the working surface dimensions (matching the typical component sizes the washer handles), the pump type and flow rate (typical 12-25 litres per minute on circulating-pump units), the heater specification (where fitted — typical 250-500W for warm-cleaning models), the operating voltage (230V single-phase standard for workshop units), and the cleaning-fluid compatibility (solvent-based vs aqueous — the materials of the pump, seals, and tank determine which fluids are safe). Always match the cleaning fluid to the washer's compatibility specification — solvent-rated washers can use both solvent and aqueous fluids; aqueous-only washers must not be used with solvent fluids. The fluid type and chemical compatibility are listed on every product page. Trade pricing on multi-unit and workshop fit-out orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 20 of 20 entries
FAQs

Solvent-based washers use petroleum-based cleaning fluids — strong oil-and-grease removal, fast cleaning, but require ventilation and have flash-point handling considerations. Aqueous washers use water-based detergent solutions — slower cleaning but no fumes, no flash-point concern, and easier waste disposal in many UK trade settings. Modern workshops typically use aqueous for routine cleaning and solvent only where heavy contamination demands it. Match the washer's fluid compatibility to the cleaning task.

Match the working surface and tank capacity to the typical components cleaned. For small components (carburettors, brake calipers, light bearings), 30-50 litre bench-top units are sufficient. For mid-sized components (transmissions, large bearings, engine sub-assemblies), 60-100 litre free-standing units. For full engine and gearbox cleaning, 100-150+ litre large-capacity units with reinforced trolley bases. The capacity and working surface dimensions are listed on every product page.

Ultrasonic cleaners use high-frequency sound waves transmitted through cleaning fluid to dislodge contamination from the surface and recesses of components — excellent for fine-detail and hard-to-reach internal cleaning (carburettor jets, fuel-injector internals, machined surface finishing). Capacity is typically 5-30 litres for trade-shop ultrasonic units. Match the working-tank dimensions to the components being cleaned. Ultrasonic doesn't replace solvent or aqueous washers for bulk cleaning — it complements them.

Yes. Replacement circulating pumps (matched by the washer model), replacement cleaning brushes (the manual scrub brushes plumbed into the wash circuit), replacement drain-tray and lid components, and the matching cleaning fluids (solvent and aqueous formulations) are available across the SIP, Sealey, and Draper parts washer ranges. Search by the washer model code, or WhatsApp 07754288583 with a photograph for cross-reference.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service