Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 3 working days |
Product Number: LT/FLO103-30M
Variations
The FLO103 is our economy, non-mercury option float switch, ideal for general-purpose use. The body is constructed from a polypropylene housing moulded to a 3-core synthetic rubber cable, with an internal micro switch and rolling ball operator.
We offer a range of counterweights, designed to act as pivots when there is no fixed object to attach a float switch. Alternatively, the Ready Level chain and counterweight assembly can be combined with our FLO range for a complete level control solution.
Features| Cable Length | 30 m |
|---|---|
| Weight | 3.8 kg |
| Dimensions (HxWxD) | 300 × 300 × 200 mm |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Quick delivery and the product at a very competitive price.
Highly Recommend
I ordered a starter motor for my Polaris ranger, best price around and prompt service.
thanks for sending the part so quickly, and was just the job
1st class,excellent service.
Excellent service
You stock the parts that I needed and delivered quickly and efficiently.
Worth the Money
Strong and Excellent Quality.
10 out of 10 from me!
Great price.
Great delivery.
Very easy transaction the machine arrived on time and well packaged,
Absolutely spot on!
Excellent website, easy ordering, great price, speedy delivery and an excellent machine at an excellent price!
Thanks very much!!
Great service with speedy delivery, easy ordering system and great during & after service support.
Standard Delivery: £4.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | LT/FLO101-30M | LT/FLO106-30M | LT/FLO107-30M | LT/FLO102-30M |
A. Manual: Requires manual operation (no automatic on/off) Auto F Float: Comes with a standard float switch for automatic control Auto Z Float: Supplied with a vertical float switch, ideal for tight spaces like chambers and sumps
A. It depends on the range: Trencher, Liberator, and PuddlePal are suitable for dirty water and light slurry. T-T Well and Hidro Boost® Autosmart are designed for clean water. Always check product specifications before installation.
A. Submersible Drainage Pumps are ideal for removing water with small particles from flooded areas. Dewatering Pumps are used to remove clean or slightly dirty water, often from construction sites or basements.
A. Most T-T submersible pumps are designed for intermittent use. Continuous use is possible in certain models (especially vortex or high-flow pumps) but always refer to the technical data or reach out to support.
A. Yes, all T-T submersible pumps are IP68 rated for outdoor and submerged operation.
A. Yes, many T-T Pumps are made for dirty or muddy water. Models like Trencher, Liberator, and Goliath can handle water with silt, mud, or debris. Just check the pump type to be sure it’s suitable for your job.
A. 110V: Suitable for domestic or light-duty use. 230V: Common in residential and light commercial environments. 400V: Designed for industrial and heavy-duty applications with three-phase power supply.
A. Auto models run automatically using float switches. Manual models need to be started and stopped manually or fitted with a compatible float switch and control setup.
A. This depends on the model. Well pumps, for example, can draw from greater depths (up to 30-40m), while dewatering pumps typically operate in pits or shallow water.
A. Regularly inspect for blockages, clean filters (if applicable), and check electrical cables for wear. Ensure float switches are moving freely. For booster and well pumps, check pressure and flow routinely.
A. These refer to the motor power: T400 = 0.4kW T750 = 0.75kW T1500 = 1.5kW Higher power generally means higher flow rate and head height.
A. Use LT/FLO101 series for ATEX/low-current environments LT/FLO102 for general-purpose dewatering LT/FLO103 for economy applications LT/FLO106 for fuel/oil LT/FLO107 for drinking water (WRAS/NSF certified)
A. Yes, for accurate switching depth control, especially in deep wells or wide tanks — use LT/FLOCW-1 to -4 depending on cable thickness and required tension.
A. Yes. The Hidro Boost Autosmart range and Well Pumps are ideal for irrigation, pressure boosting, or garden watering applications.
By sharing your email, you agree to our privacy policy & terms of service
.jpg?v=1752667365 . '&width=70)
.jpg?v=1752667365 . '&width=70)
Question about this product? Click here
.jpg)
.jpg?v=1752667365)
.jpg?v=1752667365)
.jpg?v=1752667365)
.jpg?v=1752667365)
