Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 4 working days |
| Next Day | £15.54 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
Product Number: 07648
Variations
The SIP 07648 welding clamp. The SIP 6" 274 Welders Angle Clamp is a specialist jig and fixture clamp manufactured from heavy-duty and extremely durable cast iron along with a copper-plated spindle and sliding 'T' handle for improved grip in a range of applications. Manufactured from cast iron for increased durability. High-quality robust specialist jig and fixture clamp. Compatible across the sip welding, sip welding clamps welding range — check product specifications for exact model fit. Also known as magnetic clamp or welding jig in welding supplies catalogues.
Additional Information:
The SIP 6" 274 Welders Angle Clamp is a specialist jig and fixture clamp manufactured from heavy-duty and extremely durable cast iron along with a copper-plated spindle and sliding 'T' handle for improved grip in a range of applications.About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| ITEM NO | 07648 |
|---|---|
| Clamp Type | 6" (152mm) |
| Spindle Type | Copper |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price | |
|---|---|---|---|---|---|
|
05782 | SIP 05782 HG250 Inverter Plasma Cutter | 1 Unit |
£260.70
£255.59
|
Add |
|
05683 | SIP 05683 Plasma Cutter with Internal Compressor 230V, Single Phase 25A | 1 Unit |
£551.40
£540.59
|
Add |
|
05685 | SIP 05685 WELDMATE® PRO 40A Inverter Plasma Cutter | 1 Unit |
£330.84
£324.35
|
Add |
|
05687 | SIP 05687 WELDMATE® PRO 55A Inverter Plasma Cutter | 1 Unit |
£441.12
£432.47
|
Add |
|
05689 | SIP 05689 WELDMATE® PRO 80A Inverter Plasma Cutter | 1 Unit |
£937.39
£919.01
|
Add |
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 4 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Welding 3 Row Carbon Steel Wire Scratch Brush with Scraper, 350mm, 17179, Draper
£11.71
£11.48
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 07649 | 09550 | 11951 | 14027 | 17179 |
A. The SIP 07648 is a angle clamp for positioning and holding workpieces at the correct angle during tack welding and fabrication. Angle clamps hold two pieces at a precise angle (typically 90°) for tacking before full welding.
A. Jaw capacity is listed in the Technical Specifications section of the product listing. Check this against your material section size before ordering — a clamp that cannot open fully to grip your material is useless.
A. Yes — mechanical clamps like the SIP 07648 work on any material regardless of magnetic properties.
A. The jaw faces may leave light impressions on soft or polished surfaces. Place a thin piece of scrap material between the jaw and the workpiece to protect finished surfaces. On structural work where marks don't matter, use the clamp directly.
A. For simple butt or corner joints, two clamps is typically enough. For frame welding (square section, angle iron), four to six clamps gives good control. Build your collection gradually based on the joints and sections you weld most frequently.
A. The SIP 07648 is designed for welding environments. Avoid positioning directly under the arc. Let the clamp cool between heavy tacking sessions.
A. The SIP 07648 is manufactured to standard fabrication tolerances. For critical angular accuracy, verify with a square after clamping and before tacking — clamps hold position but thermal distortion during welding can shift angles slightly on large assemblies.
A. Keep strong magnets away from inverter welding machines — the magnetic field can affect the sensitive electronics. Position magnetic clamps on the workpiece, away from the machine and welding leads.
A. Pre-weld cleaning removes rust, paint, oil, and mill scale that cause porosity, weak fusion, and spatter. Post-weld cleaning removes slag and discolouration for inspection and appearance. A wire brush is the most common tool — use stainless steel brushes on stainless steel to avoid contamination, and carbon steel brushes on mild steel.
A. Yes — UK stocked for fast despatch. Check availability at PartsForMachines.com. Orders placed before the daily cut-off are dispatched same or next working day. Check the product page for current delivery estimates.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
