Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | FREE | 2 to 4 working days |
| Next Day | £15.54 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | FREE | 7 to 10 working days |
Product Number: 05683
Cut metal anywhere — no external compressor needed. Output spans 15A - 25A with a @ 20°C: 25A @ 40% duty cycle forportable automotive, garage, and agricultural plasma cutting.
EU Regulation 2019/1784 compliant. 4th-generation inverter (>80% efficient).
Features:
Suited to automotive, garage, workshop environments.
Fan-assisted cooling manages operating temperature during sustained welding. Automatic thermal overload protection cuts output if the machine exceeds safe temperature, with IP21 protection rating for workshop use. Buyers comparing plasma cutters will find the 05683 handles mild steel, stainless steel, and from a single machine. Plasma cutting is faster and cleaner than oxy-fuel on thin to medium gauge material, with no pre-heat required. Plasma cutting works on any electrically conductive material. Non-conductive materials such as wood, plastic, and ceramics cannot be plasma cut. Covered by SIP's standard warranty — register at time of purchase to activate. Replacement consumables including contact tips, nozzles, and electrodes for the 05683 are available at PartsForMachines.com.
Additional Information:
The SIP WELDMATE® 25A Inverter Plasma Cutter with Internal Compressor is a powerful and versatile inverter plasma cutter designed for use in automotive and garage environments, professional fabrication workshops and agricultural settings.
Easy to operate and safer than cutting with a naked flame, this powerful and compact inverter plasma cutter has a cutting capacity up to 8mm thickness. It also features an internal compressor eliminating the need for an external air supply for added convenience and trouble-free set-up. Operates from a 13A supply for added flexibility.
Fully compliant with Reg EU 2019/1784 (Eco Design for Welding Equipment), this plasma cutter features a 4th generation inverter which is above 80% energy efficient. This means it uses less power at the same output as older inverters, helping to lower operating costs.
About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Input Supply | 230v (13A) |
|---|---|
| Output Current | 15A - 25A |
|
Output Voltage: 86v - 90v: 325v DC Open Circuit Volts
|
|
| Duty Cycle @ 20°C | 25A @ 40% |
| Cutting Thickness | 6mm (quality) / 8mm (severance) |
| Protection / Insulation | IP21 / H |
Pro Tips for Buying Welding Machines: Types, Uses, and Choosing the Perfect Fit Introduction:Welding, the art of joining metals through heat and precision, has evolved significantly with the advent of adv...
Standard Delivery: UK Mainland Free
Next Day Delivery Available
Delivery Estimate: 2 to 4 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
SIP 05685 WELDMATE® PRO 40A Inverter Plasma Cutter
£330.84
£324.35
2% OFF
Free delivery in UK Mainland
|
SIP 05787 HG500 Plasma Inverter Cutter 230v, Single Phase 50A
£618.65
£606.52
2% OFF
Free delivery in UK Mainland
|
SIP 05783 INT300 Plasma Inverter with Internal Compressor 230v, Single Phase 25A
£834.27
£817.91
2% OFF
Free delivery in Channel Island
|
Sealey PP40PLUS Plasma Inverter Cutter 40A with Integral Compressor
£560.42
£549.43
2% OFF
Free delivery in UK Mainland
|
Clarke Plasma King 20CI Plasma Cutter with Built-in Air Compressor
£945.75
£927.21
2% OFF
Free delivery in UK Mainland
|
Draper 70066 High Frequency Plasma Cutter, 40A
£195.46
£191.63
2% OFF
Free delivery in UK Mainland
|
||||
| Technical Specification | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT NUMBER | 05782 | 05685 | 92454 | PP25E | 05787 | 05783 | PP40PLUS | 6016020 | PP40E | 70066 |
| Output voltage | 84.8 | |||||||||
A. The 05683 cuts any electrically conductive material including mild steel, stainless steel, aluminium, copper, and brass. It cannot cut non-conductive materials such as wood, plastic, or ceramics.
A. Yes. The 05683 runs from a standard 13A household socket — no specialist wiring or electrician required. This makes it particularly convenient for garage and home workshop use.
A. The 05683 has a duty cycle of 20°C: 25A @ 40%. Duty cycle is measured over a 10-minute period — a 60% duty cycle means 6 minutes of continuous welding followed by a 4-minute cool-down. Operating at lower amperages increases available run time.
A. The 05683 is supplied with the accessories needed to start welding — check the product listing for the complete included items. Additional consumables for the 05683 are available at PartsForMachines.com.
A. The 05683 is primarily designed for workshop use. Check the specification for weight and portability details.
A. Yes. The 05683 cuts aluminium along with mild steel, stainless steel, copper, and brass. Plasma cutting works on any electrically conductive material — non-conductive materials cannot be plasma cut.
A. Yes. The 05683 is fitted with automatic thermal overload protection that cuts output if the machine exceeds safe operating temperature. It will restart automatically once it has cooled. Operating within the rated duty cycle minimises the frequency of thermal interruptions.
A. A clean bare-metal contact point is generally needed to start the plasma arc reliably. For painted or coated surfaces, cleaning the start point is recommended.
A. The 05683 cuts any electrically conductive material — mild steel, stainless steel, aluminium, copper, and brass — up to its rated maximum thickness. For best edge quality, cut at around 60–70% of maximum rated thickness. Thicker material can be severed but the edge will be rougher and may need grinding.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
