Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ25PM2
Variations
A hose joint that needs constant nipping up is telling you the clip, not the hose, is past it.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGZ25PM2 adds the JCS details that make that reliable - a 17-25mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 5.0 Nm (45 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
The band is mild steel, heavily electro zinc plated, passivated and tested to EN9227 - JCS's general purpose specification for domestic, automotive and industrial duty away from salt and standing moisture. One clip covers a wider span than a typical nut-and-bolt clamp, so fewer sizes cover more hoses. Seat it centrally over the barb when fitting.
Also available - the same clip in a 5-pack (HGZ25PM1); the 14-22mm size (HGZ22PM2); the 22-30mm size (HGZ30PM2); a 304 stainless version of the same size and pack (HGS25PM2).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 17-25mm (approx 11/16 - 1 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 17-25mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS25PM2 (10 Pack)
£17.17
£16.67
3% OFF
|
|||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ25PM1 | HGZ22PM2 | HGZ30PM2 | HGS25PM2 |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Stainless steel |
| Clamping Range | 17-25mm | 14-22mm | 22-30mm | 17-25mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | |||
| Pack Qty | 5 | 10 | 10 | 10 |
A. It adjusts between 17-25mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 17-25mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 11/16 to 1 in, covering common 3/4 and 7/8 in hose sizes.
A. JCS recommends 5.0 Nm (45 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. JCS electro zinc plates and passivates the mild steel band after it is cut to size, so even the cut edges carry coating - and the finish is tested to EN9227. That suits dry and general duty; once salt or standing moisture is involved, the stainless range is the correct specification.
A. No - JCS itself cautions that zinc-coated clamps can quickly corrode or seize around salt water. The marine specification is Hi-Grip Stainless: 18/8 304 stainless throughout, with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 17-25mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
