Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ55BG
Variations
On machinery that vibrates for a living, an ordinary hose clip slowly backs itself off until the joint weeps.
Sized to adjust between 40-55mm, the HGZ55BG carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 6.0 Nm (54 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Zinc plated for general purpose service, this clip is the everyday choice for automotive, domestic and industrial hose joints in non-corrosive conditions; for persistently wet or salty duty JCS points buyers to its stainless range instead. Size by the fitted outside diameter of the hose and tighten in stages. A 5-pack suits a multi-point job or the van stock bin.
Also available - the same clip as a retail carton (HGZ55RP); the same clip as a bulk pack (HGZ55BP); the 35-50mm size (HGZ50BG); the 45-60mm size (HGZ60BG).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 40-55mm (approx 1 9/16 - 2 3/16 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ55RP | HGZ55BP | HGZ50BG | HGZ60BG |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 40-55mm | 40-55mm | 35-50mm | 45-60mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Pack Qty | 10 | 10 | 5 | 5 |
A. It adjusts between 40-55mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 40-55mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 9/16 to 2 3/16 in, covering common 1 3/4 and 2 in hose sizes.
A. For this size band JCS publishes a recommended torque of 6.0 Nm (54 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. JCS electro zinc plates and passivates the mild steel band after it is cut to size, so even the cut edges carry coating - and the finish is tested to EN9227. That suits dry and general duty; once salt or standing moisture is involved, the stainless range is the correct specification.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 5 clips, all 40-55mm adjustment range. Other pack formats of the same clip are listed separately.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
