Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Heater

Start Now

Shop by Sub Category

Brands

FAQs

Infrared heating works best in tall, draughty, or open-sided workshops, in spaces with high ceilings where warm air rises above working level, in workshops where the door opens frequently, in outdoor or partially outdoor applications (loading bays, covered yards), and for spot-heating specific work areas without warming the whole space. Convection heating works better in well-sealed spaces where the air volume can be heated and retained efficiently.

As a general guide for well-insulated workshops, allow 100-150 W per cubic metre of space; for poorly-insulated workshops, allow 200+ W per cubic metre. A 100m³ workshop (roughly 8m × 5m × 2.5m) needs 10-20 kW of output. Infrared heaters are sized in kW similarly to convection heaters but the perceived warmth comes from radiated heat striking surfaces rather than warmed air, so coverage feels different in use. The product page lists area-coverage estimates.

No — gas-fired heaters (propane, natural gas) and oil-fired heaters produce combustion by-products (carbon monoxide, water vapour) that must be vented or extracted. Each gas infrared heater specifies a minimum air-change rate or ventilation requirement on its product page; for indoor use without adequate ventilation, choose an electric infrared heater instead. Outdoor, semi-outdoor, and well-ventilated indoor applications can run gas infrared heaters within manufacturer guidelines.

Infrared heaters are widely used in paint-curing applications because they heat the painted surface directly without disturbing airborne particles. However, the radiant heat output is significant — the manufacturer's minimum-distance guidance must be observed when positioning the heater near flammable materials, fuel, or solvents. Each heater's safety distance is listed on its product page; for paint-curing applications, dedicated curing infrared lamps with controlled wavelength are recommended.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Infrared Heater

FilterFilters
View as Grid List

Within Heating, Infrared Heater covers the radiant heating equipment used in workshops, agricultural buildings, garages, and industrial spaces where the goal is to heat people and surfaces directly rather than warm the air volume. Infrared (sometimes called radiant) heaters work differently from convection heaters — the heating element emits infrared radiation that warms whatever it strikes (people, surfaces, equipment) without first having to heat the surrounding air.

This makes them efficient in tall, draughty, or open-sided workshops where convective heating struggles. Parts For Machines supplies infrared heaters across the trade and professional ranges — typical applications include workshop and garage heating, animal-shed heating in agricultural settings, paint-curing and finishing-bay applications, and outdoor work-area heating. Common power sources include electric mains-fed (for cleaner, fume-free indoor use), propane gas (for higher heat output where ventilation is available), and oil-fired industrial infrared (for the largest applications).

Parts For Machines is an Authorised Distributor and Seller of SIP and Sealey across the infrared heater range. SIP and Sealey together cover the breadth of trade-grade infrared kit, from compact electric infrared lamps for spot heating up to high-output gas-fired infrared heaters used in industrial and agricultural applications. Clarke and Rhino extend the range with workshop and agricultural heaters at competitive trade pricing.

Product pages list heat output (in kW or BTU/hour — typical electric infrared heaters run 1-3 kW; propane infrared heaters run 5-15 kW; oil-fired industrial infrared can exceed 30 kW), power source, area coverage estimate (in square metres), mounting style (free-standing, wall-mounted, ceiling-suspended), and any ventilation requirements (gas-fired and oil-fired heaters require adequate ventilation; Product pages list the minimum air-change rate). Trade pricing on multi-unit and fit-out orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 4 of 4 entries
FAQs

Infrared heating works best in tall, draughty, or open-sided workshops, in spaces with high ceilings where warm air rises above working level, in workshops where the door opens frequently, in outdoor or partially outdoor applications (loading bays, covered yards), and for spot-heating specific work areas without warming the whole space. Convection heating works better in well-sealed spaces where the air volume can be heated and retained efficiently.

As a general guide for well-insulated workshops, allow 100-150 W per cubic metre of space; for poorly-insulated workshops, allow 200+ W per cubic metre. A 100m³ workshop (roughly 8m × 5m × 2.5m) needs 10-20 kW of output. Infrared heaters are sized in kW similarly to convection heaters but the perceived warmth comes from radiated heat striking surfaces rather than warmed air, so coverage feels different in use. The product page lists area-coverage estimates.

No — gas-fired heaters (propane, natural gas) and oil-fired heaters produce combustion by-products (carbon monoxide, water vapour) that must be vented or extracted. Each gas infrared heater specifies a minimum air-change rate or ventilation requirement on its product page; for indoor use without adequate ventilation, choose an electric infrared heater instead. Outdoor, semi-outdoor, and well-ventilated indoor applications can run gas infrared heaters within manufacturer guidelines.

Infrared heaters are widely used in paint-curing applications because they heat the painted surface directly without disturbing airborne particles. However, the radiant heat output is significant — the manufacturer's minimum-distance guidance must be observed when positioning the heater near flammable materials, fuel, or solvents. Each heater's safety distance is listed on its product page; for paint-curing applications, dedicated curing infrared lamps with controlled wavelength are recommended.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service