Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Match three things: pad diameter (matched to the jack's saddle, typically 50-100mm for most workshop jacks), saddle bore (the centre bore that fits over the jack's saddle stub), and load rating (matched to the jack's lifting capacity — never under-rate). The original pad will have the dimensions stamped or moulded into it; replacement pads list the matching dimensions on the product page. Polyurethane pads are typically more durable than rubber for high-frequency use.

Yes, in most cases — replacement seal kits are available for the common workshop hydraulic floor jacks. The seal kit typically includes the ram-rod seal, the wiper seal, the piston seal, and any small O-rings used in the release-valve mechanism. Match the seal kit to the jack's make and model — different jack ranges use different seal sizes. After re-sealing, refill with the correct hydraulic-jack oil (not engine oil — jack oil has specific viscosity and additives) and bleed the system.

Replacement jack pads should be rated at or above the parent jack's lifting capacity — never below. A 2-tonne pad on a 2-tonne jack is fine; a 2-tonne pad on a 5-tonne jack is dangerous and will crush. The load rating is listed on every replacement pad product page. For mixed-fleet workshops with several jack capacities, label or colour-code the pads to prevent mismatched fitment.

Yes — replacement saddle adapters (the rubber-topped pads that contact the vehicle's lift point) and arm extensions are available for most major vehicle-lift ranges. Match by the lift's make, model, and arm type (the bolt pattern, saddle bore, and saddle outer diameter must all match). Lift accessories are safety-critical — only fit replacement parts rated for the lift's full load capacity, and always check the manufacturer's manual for approved replacement-part part numbers.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Lifting & Automotive Accessories

FilterFilters
View as Grid List

Within Spare & Accessories, Lifting & Automotive Accessories cover the replacement and accessory parts used with workshop lifting equipment and the automotive accessory tooling kept alongside power-tool ranges — replacement jack pads and rubber blocks, axle-stand top pads, lifting-arm extensions, vehicle-lift adapters, hydraulic-jack repair seal kits, and the supporting accessory parts that support the workshop's lifting and automotive equipment. Within Lifting & Automotive Accessories you will find replacement jack pads (rubber and polyurethane pads sized to the major jack and stand brands), vehicle-lift saddle adapters and extensions, hydraulic-cylinder seal and repair kits, replacement castors and wheels for jack bases, and the broader range of lifting-equipment service parts.

Parts For Machines supplies lifting and automotive accessories across the trade range. Parts For Machines is an Authorised Distributor and Seller of SIP, Draper, and Sealey across the lifting-accessory line. The accessories cover both same-brand replacement service parts (for our own lifting equipment range) and cross-fit replacement parts that match the dimensional and rating specs of equipment from the wider trade-lifting market.

Product pages list the application (the specific jack, stand, or lift the accessory fits), the dimensions (pad diameter and depth, saddle bore, mounting bolt-pattern), the load rating (matched to the jack or stand's rated lifting capacity), the material and finish (typically polyurethane or rubber for pads, hardened steel for load-bearing components), and any compatibility notes on the specific equipment the accessory fits. For replacement of an existing accessory, match by the original equipment's make and model — most jack and stand replacement parts are listed by their parent equipment fitment. For cross-fit accessories, match by dimensional spec and load rating.

Lifting-equipment service is safety-critical: never substitute under-rated parts (e.g., a pad rated for a 2-tonne jack on a 5-tonne jack), and always inspect lifting equipment after any service-part replacement. Trade pricing on multi-tool and workshop fit-out orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 121 to 150 of 224 entries
FAQs

Match three things: pad diameter (matched to the jack's saddle, typically 50-100mm for most workshop jacks), saddle bore (the centre bore that fits over the jack's saddle stub), and load rating (matched to the jack's lifting capacity — never under-rate). The original pad will have the dimensions stamped or moulded into it; replacement pads list the matching dimensions on the product page. Polyurethane pads are typically more durable than rubber for high-frequency use.

Yes, in most cases — replacement seal kits are available for the common workshop hydraulic floor jacks. The seal kit typically includes the ram-rod seal, the wiper seal, the piston seal, and any small O-rings used in the release-valve mechanism. Match the seal kit to the jack's make and model — different jack ranges use different seal sizes. After re-sealing, refill with the correct hydraulic-jack oil (not engine oil — jack oil has specific viscosity and additives) and bleed the system.

Replacement jack pads should be rated at or above the parent jack's lifting capacity — never below. A 2-tonne pad on a 2-tonne jack is fine; a 2-tonne pad on a 5-tonne jack is dangerous and will crush. The load rating is listed on every replacement pad product page. For mixed-fleet workshops with several jack capacities, label or colour-code the pads to prevent mismatched fitment.

Yes — replacement saddle adapters (the rubber-topped pads that contact the vehicle's lift point) and arm extensions are available for most major vehicle-lift ranges. Match by the lift's make, model, and arm type (the bolt pattern, saddle bore, and saddle outer diameter must all match). Lift accessories are safety-critical — only fit replacement parts rated for the lift's full load capacity, and always check the manufacturer's manual for approved replacement-part part numbers.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service