Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Three approaches to non-marking operation: (1) rubber pads — clip-on or bolt-on accessories that fit over existing steel track shoes. Removable, fastest to fit. (2) Rubber shoes — integral rubber-and-steel composite track shoes built into the track chain. Permanent installation, higher load capacity than rubber pads, suitable for continuous non-marking use. (3) Full rubber tracks — single-piece rubber tracks replacing the entire steel-track. Best ride and lowest noise, but lowest load capacity. Match the approach to the operating requirements: pads for occasional, shoes for permanent-non-marking, tracks for continuous-non-marking light-duty work.

Match by the equipment make, model, and original shoe specification. Three measurements identify most rubber shoes: (1) overall width (across the tread face); (2) overall length (along the track-chain direction); (3) mounting-bolt pattern (the bolt-hole positions that fix the shoe to the track-chain pin link). The OEM part number is the fastest match where available. For older or specialist equipment, WhatsApp 07754288583 with the equipment make, model, and a clear photograph of the existing shoe.

Possible but typically not economical. Rubber shoes attach to the track-chain pin links — converting from steel shoes to rubber shoes requires removing the existing track-chain, replacing each shoe in turn, and reassembling. The labour cost typically exceeds the material savings vs buying a full rubber-shoe track-chain assembly. For most retrofit applications, the practical choices are rubber pads (clip-on, no track-chain modification) or a complete replacement track (rubber-shoe or full rubber depending on application). The economics depend on labour rates and equipment availability.

Yes. Track-chain pin-and-bushing kits (the wear parts that connect track shoes together — pins and bushings wear with track operation and require replacement during track-chain rebuild), individual replacement shoes (for replacement of damaged single shoes in an otherwise-good track), and complete rebuild kits (covering pins, bushings, shoes, and matched hardware) are available across the rubber-shoe range. Match by the equipment make and the track-chain specification. WhatsApp 07754288583 for cross-reference and rebuild advice.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Rubber Shoe

FilterFilters
View as Grid List

Within Under Carriage, Rubber Shoe covers the rubber-and-steel composite track shoes used on plant tracked-equipment that combines steel-track strength with rubber-tread non-marking and low-noise operation — the rubber-faced steel track shoes built into the track chain. Distinguished from rubber pads (which clip over existing steel shoes) by being integral track-chain components rather than removable accessories.

Parts for Machines supplies rubber shoes across the plant aftermarket — covering rubber-shoe replacement parts for the major plant equipment ranges, sized to match specific equipment track-chain geometries.

Product pages list the equipment make and model the shoe is approved for, the shoe size (width, length, mounting-bolt pattern matched to the equipment track-chain), the rubber compound (non-marking grey or black compound for finished-surface work; specific compounds for marine and harsh-environment use), the steel construction grade, the load rating, the OEM cross-reference, and any specific compatibility notes.

For replacement of an existing rubber shoe, the OEM part number is the most reliable match. Where the OEM number isn't available, identify by the equipment make, model, and the shoe's measured dimensions. Always replace shoes in matched sets — mixing old worn shoes with new shoes gives uneven track tension and uneven wear. Rubber-shoe track-chains give the strength of steel-track combined with the non-marking and noise-reduction benefits of rubber. The application: equipment that needs to operate on a mix of finished surfaces (warehouse floors, indoor industrial environments) and structurally-demanding work (where pure rubber tracks would be insufficient strength). Specialist applications include underground mining equipment, demolition equipment, and indoor industrial-handling equipment. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 781 to 810 of 5339 entries
FAQs

Three approaches to non-marking operation: (1) rubber pads — clip-on or bolt-on accessories that fit over existing steel track shoes. Removable, fastest to fit. (2) Rubber shoes — integral rubber-and-steel composite track shoes built into the track chain. Permanent installation, higher load capacity than rubber pads, suitable for continuous non-marking use. (3) Full rubber tracks — single-piece rubber tracks replacing the entire steel-track. Best ride and lowest noise, but lowest load capacity. Match the approach to the operating requirements: pads for occasional, shoes for permanent-non-marking, tracks for continuous-non-marking light-duty work.

Match by the equipment make, model, and original shoe specification. Three measurements identify most rubber shoes: (1) overall width (across the tread face); (2) overall length (along the track-chain direction); (3) mounting-bolt pattern (the bolt-hole positions that fix the shoe to the track-chain pin link). The OEM part number is the fastest match where available. For older or specialist equipment, WhatsApp 07754288583 with the equipment make, model, and a clear photograph of the existing shoe.

Possible but typically not economical. Rubber shoes attach to the track-chain pin links — converting from steel shoes to rubber shoes requires removing the existing track-chain, replacing each shoe in turn, and reassembling. The labour cost typically exceeds the material savings vs buying a full rubber-shoe track-chain assembly. For most retrofit applications, the practical choices are rubber pads (clip-on, no track-chain modification) or a complete replacement track (rubber-shoe or full rubber depending on application). The economics depend on labour rates and equipment availability.

Yes. Track-chain pin-and-bushing kits (the wear parts that connect track shoes together — pins and bushings wear with track operation and require replacement during track-chain rebuild), individual replacement shoes (for replacement of damaged single shoes in an otherwise-good track), and complete rebuild kits (covering pins, bushings, shoes, and matched hardware) are available across the rubber-shoe range. Match by the equipment make and the track-chain specification. WhatsApp 07754288583 for cross-reference and rebuild advice.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service