Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Two approaches to non-marking operation: (1) rubber tracks — replace the entire steel track with a rubber track. Lower operating noise, more comfortable ride, but slower to fit (typical 2-4 hours per side) and requires the rubber tracks as separate items. (2) Rubber pads — clip or bolt rubber pads onto existing steel-track shoes. Faster fitment (30-60 minutes for clip-on), no track replacement needed, but slightly higher noise and rougher ride than full rubber tracks. For occasional non-marking work, rubber pads are practical. For continuous non-marking operation, full rubber tracks are typical.

Clip-on rubber pads: spring-clip mechanism fits over the steel track shoe and grips the shoe edges. Fast change-over (typical 30-60 minutes per side), no track removal needed, suitable for daily change-over between rough and finished surfaces. Bolt-on rubber pads: bolted to the steel track shoe through the shoe's existing bolt holes. Higher load capacity, better resistance to walking-off in heavy use, but requires track removal to fit and remove. Bolt-on is the practical choice for permanent or semi-permanent fitment; clip-on for daily flexibility.

Rubber-pad service life depends on operating intensity and surface type. On clean concrete and finished surfaces (the use case the pads are designed for), 1,500-3,000 operating hours is typical. On grit, gravel, or rough surfaces, the softer non-marking compound wears noticeably faster — losing tread depth quickly. Operating rubber pads on rough surfaces is a common cause of premature wear; switch to steel-track or full rubber tracks for rough-surface work, and reserve rubber pads for clean-surface use.

Yes. Replacement clip-springs (the spring-clip hardware that grips the steel track shoe — wears with repeated change-overs), replacement bolt-mounting kits (for bolt-on pads, including the fastening hardware), pad-removal tools (specialist tools for unclipping seized clip-on pads), and replacement individual pads (for replacement of damaged single pads in a set) are available across the rubber-pad accessory range. Match by the pad model code, or WhatsApp 07754288583 with the equipment make for cross-reference.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Rubber Pad

FilterFilters
View as Grid List

Within Under Carriage, Rubber Pad covers the rubber track pads (also called rubber shoes or clip-on rubber pads) that fit over steel-track shoes on plant tracked-equipment — converting the equipment to non-marking, low-noise operation suitable for finished surfaces, indoor work, and noise-sensitive environments. Used to protect concrete, asphalt, and finished landscape paving from track damage when steel-track equipment must operate on these surfaces.

Parts for Machines supplies rubber pads across the plant aftermarket — covering pads for the major mini-excavator, compact track loader, skid-steer, and larger excavator-and-dozer ranges. Rubber pads are typically clip-on or bolt-on accessories that fit over the steel track shoes, allowing the equipment to be temporarily converted between steel-track (rough surface, earthwork) and rubber-pad operation (finished surface, indoor work).

Product pages list the equipment make and model the pads are approved for, the track-shoe size (the rubber pad must match the steel-track shoe geometry and width), the pad type (clip-on for fast change-over; bolt-on for permanent fitment requiring track removal to change), the rubber compound (typically grey or black non-marking compound — non-marking means the rubber doesn't transfer to the floor surface during normal operation), the pad thickness, the load rating, and the OEM cross-reference where applicable.

For temporary conversion of steel-track equipment to non-marking operation, clip-on rubber pads give the fastest change-over (typically 30-60 minutes per side for a mini-excavator). For permanent or semi-permanent conversion, bolt-on pads give better load-bearing capability but require track removal to fit. Always use complete sets matched to the equipment. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583. Check compatibility before ordering.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1141 to 1170 of 5434 entries
FAQs

Two approaches to non-marking operation: (1) rubber tracks — replace the entire steel track with a rubber track. Lower operating noise, more comfortable ride, but slower to fit (typical 2-4 hours per side) and requires the rubber tracks as separate items. (2) Rubber pads — clip or bolt rubber pads onto existing steel-track shoes. Faster fitment (30-60 minutes for clip-on), no track replacement needed, but slightly higher noise and rougher ride than full rubber tracks. For occasional non-marking work, rubber pads are practical. For continuous non-marking operation, full rubber tracks are typical.

Clip-on rubber pads: spring-clip mechanism fits over the steel track shoe and grips the shoe edges. Fast change-over (typical 30-60 minutes per side), no track removal needed, suitable for daily change-over between rough and finished surfaces. Bolt-on rubber pads: bolted to the steel track shoe through the shoe's existing bolt holes. Higher load capacity, better resistance to walking-off in heavy use, but requires track removal to fit and remove. Bolt-on is the practical choice for permanent or semi-permanent fitment; clip-on for daily flexibility.

Rubber-pad service life depends on operating intensity and surface type. On clean concrete and finished surfaces (the use case the pads are designed for), 1,500-3,000 operating hours is typical. On grit, gravel, or rough surfaces, the softer non-marking compound wears noticeably faster — losing tread depth quickly. Operating rubber pads on rough surfaces is a common cause of premature wear; switch to steel-track or full rubber tracks for rough-surface work, and reserve rubber pads for clean-surface use.

Yes. Replacement clip-springs (the spring-clip hardware that grips the steel track shoe — wears with repeated change-overs), replacement bolt-mounting kits (for bolt-on pads, including the fastening hardware), pad-removal tools (specialist tools for unclipping seized clip-on pads), and replacement individual pads (for replacement of damaged single pads in a set) are available across the rubber-pad accessory range. Match by the pad model code, or WhatsApp 07754288583 with the equipment make for cross-reference.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service