Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Against the tightest interference fit rather than the largest component. A bearing in an alloy housing needs far less than the same bearing in steel, and the press needs margin.

15, 20, 30, 50, 75 and 100 tonne, which crosses from car work at the light end to plant and commercial at the top. Capacity is stated per press.

No. A press two sizes above what is needed is not wasted, where a press at its limit stalls partway through a job and leaves the component neither in nor out.

A hand press is pumped, giving feel and stopping when pumping stops. A pneumatic hydraulic press drives from the air line, applying more force with less effort over repeated work.

Daylight between the bed and the ram, and the positions the bed can be set at. A press with ample tonnage and insufficient daylight cannot take the component.

Chicago Pneumatic hold each capacity in two forms, which differ in frame or drive rather than in what they press. The variant is stated on the listing.

Clear

Floor Presses

FilterFilters
View as Grid List

Tonnage on a floor press is chosen against the tightest interference fit rather than the largest component. A bearing pressed into an alloy housing needs far less than the same bearing in steel, and the press has to reach the higher figure with margin. Interference fit rather than component size is what the tonnage is actually working against.

The range here runs 15, 20, 30, 50, 75 and 100 tonne, and that span crosses from car work at the light end to plant and commercial at the top. A press two sizes above what is needed is not wasted; a press at its limit stalls partway through a job. Reaching the figure with margin also means the press is not working at its limit on every job.

Drive type changes how the load is applied. A hand hydraulic press is pumped, which gives feel and stops the moment pumping stops. A pneumatic hydraulic press drives from the air line, which applies far more force with less effort and is faster over repeated operations. Reading how often the press is used is what decides between hand and pneumatic drive.

Frame and bed set what fits. Daylight between the bed and the ram, and the position the bed can be set at, decide whether a component can be presented at all. Chicago Pneumatic hold each tonnage in two variants. Send the component and the fit to 07754288583 on WhatsApp. Sealey, Clarke, Draper and SIP hold presses across the same span alongside Chicago Pneumatic.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 70 entries
FAQs

Against the tightest interference fit rather than the largest component. A bearing in an alloy housing needs far less than the same bearing in steel, and the press needs margin.

15, 20, 30, 50, 75 and 100 tonne, which crosses from car work at the light end to plant and commercial at the top. Capacity is stated per press.

No. A press two sizes above what is needed is not wasted, where a press at its limit stalls partway through a job and leaves the component neither in nor out.

A hand press is pumped, giving feel and stopping when pumping stops. A pneumatic hydraulic press drives from the air line, applying more force with less effort over repeated work.

Daylight between the bed and the ram, and the positions the bed can be set at. A press with ample tonnage and insufficient daylight cannot take the component.

Chicago Pneumatic hold each capacity in two forms, which differ in frame or drive rather than in what they press. The variant is stated on the listing.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service