Workshop battery maintenance demands a charger capable of handling the full range of modern battery chemistries without risk of damage to sensitive electronics. The Draper 70807 12V Battery Starter Charger addresses this through microprocessor-controlled charging that regulates the charge cycle automatically, reducing the risk of overcharging and extending battery service life. Equipped with a battery recondition and desulphation mode, the unit is suitable for use on lead-acid, Gel, AGM and MF batteries. A 50A engine start function is available for situations where a vehicle requires an immediate boost. Charging current is selectable across four rates — 2A, 5A, 10A and 20A — giving the operator precise control over charge speed depending on battery size and condition. The large, easy-to-read LCD screen and mode selection control panel allow clear monitoring and adjustment at a glance. Polarity protection safeguards both the unit and the battery against incorrect connection, while dual USB ports (rated at 1.0A and 2.4A) provide a convenient charging point for ancillary devices. Onboard power cord storage and an integrated clamp holder keep cables organised and ready for use. Constructed in a rugged housing fitted with heavy-duty carry handles, the unit is built for repeated workshop use. Electrical input is 230V at 13A, and the unit measures 305 x 195 x 110mm with a weight of 2.18kg. Supplied as a single unit.
Microprocessor controlled battery charger with battery recondition/desulphation mode. Suitable for use on lead-acid, Gel, AGM and MF batteries. Fitted with a large easy to read LCD screen and a mode selection control panel, polarity protection, onboard power cord storage, clamp holder and 2 x USB ports. The rugged housing helps protect the internal microprocessor and is fitted with heavy duty carry handles.
Product Key Feature:
Microprocessor controlled50A engine start
Battery recondition/desulphation mode12V charge rates 2A, 5A, 10A, 20ALarge easy to read LCD screen and a mode selection control panelOn board power cord storage
Clamp holder1.0A and 2.4A USB ports
Rugged housing with polarity protection
Suitable for Pb, GEL, AGM, MF batteries
Contents:
1 x 12V Battery Starter Charger, 20A