Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Match the tip material to the work surface hardness. High-speed steel (HSS) tips: suitable for soft metals only (aluminium, brass, mild steel up to about 200 HV hardness). Lowest cost, fastest tip-replacement cycle. Carbide tips: suitable for most workshop materials including stainless steel and hardened steel up to 600 HV. Trade workshop standard — balance of cost and capability. Diamond tips: suitable for all engraving materials including very hardened tool steels and ceramics. Highest cost, longest service life. For general asset-marking work, carbide is the practical choice. For very hard materials, diamond is required.

Replace tips when engraving quality deteriorates — clean clear marks become faint, skipping, or unevenly deep. Typical service hours: HSS tips 5-15 hours of light marking work; carbide tips 30-100+ hours of mild-steel marking; diamond tips 100-500+ hours across all materials. Replace tips after marking work resumes after extended downtime — old tips can corrode in storage. Always test the tip on a scrap piece before starting production marking — wasting an asset-tag because the tip is worn is more expensive than a precautionary tip change.

Generally no — each engraver manufacturer uses specific collet and tip-mounting patterns that aren't cross-compatible between makes. A Chicago Pneumatic tip won't fit a Sealey engraver and vice-versa. Some manufacturers offer cross-make adapter kits but these add complexity and may not give optimal performance. The practical approach: match consumable supply to the engraver make. For workshops with multiple engraver makes, keep matched-tip supplies for each. The compatible engraver make is on every consumable product page.

Yes. Pre-printed asset-tag blanks (in aluminium and stainless-steel materials, with pre-stamped or laser-etched serial numbers, fleet IDs, or QR codes), ID-label templates (for printing or marking custom asset numbers), and matched fastener kits (for attaching asset tags to plant equipment, vehicles, and tooling) are available across the asset-marking accessory range. WhatsApp 07754288583 to discuss bulk asset-tag requirements and confirm specific manufacturer options for fleet identification.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Engraver Consumables

FilterFilters
View as Grid List

Within Engravers & Consumables, Engraver Consumables covers the consumable parts used with engraving tools — covering replacement engraver tips and nibs (carbide, diamond, and high-speed-steel tip materials in various profile shapes), replacement engraver chuck and collet hardware, asset-tag stencil templates and pre-printed asset-tags, and the matching accessories used in workshop engraving and asset-marking work.

Parts for Machines supplies engraver consumables across the trade and industrial ranges. Tips are the primary consumable for engravers — wear with use, lose effectiveness, and require routine replacement to maintain engraving quality. Stencils and templates are reusable accessories that improve marking consistency across multi-item work.

We are an authorised distributor and seller of Chicago Pneumatic, Sealey, and Draper across the engraver consumable range. Chicago Pneumatic covers replacement tips and accessories for the Chicago Pneumatic engraver range — production-grade consumables suited to high-volume marking work. Sealey covers tips, stencils, and accessories for the Sealey engraver range. Draper extends the range with workshop-grade consumables.

Product pages list the consumable type (tip, stencil, accessory, replacement part), the matching engraver model (consumables are typically engraver-specific by collet or mounting pattern), the tip material (carbide for general use, diamond for hard materials, high-speed steel for soft materials only), the tip profile (pointed for fine line work, chisel for bold marks, beveled for stamping), the included quantity (single-tip, 2-pack, 5-pack, bulk-pack), and the warranty terms. For tip replacement, match by the engraver make and model first (consumables are typically not cross-compatible between makes), then by the tip material and profile needed for the work. Always have spare tips available — engraver tips wear unpredictably and lost engraving time during a tip change is minimised by having matched replacements ready. Trade pricing on bulk and contractor orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 19 of 19 entries
FAQs

Match the tip material to the work surface hardness. High-speed steel (HSS) tips: suitable for soft metals only (aluminium, brass, mild steel up to about 200 HV hardness). Lowest cost, fastest tip-replacement cycle. Carbide tips: suitable for most workshop materials including stainless steel and hardened steel up to 600 HV. Trade workshop standard — balance of cost and capability. Diamond tips: suitable for all engraving materials including very hardened tool steels and ceramics. Highest cost, longest service life. For general asset-marking work, carbide is the practical choice. For very hard materials, diamond is required.

Replace tips when engraving quality deteriorates — clean clear marks become faint, skipping, or unevenly deep. Typical service hours: HSS tips 5-15 hours of light marking work; carbide tips 30-100+ hours of mild-steel marking; diamond tips 100-500+ hours across all materials. Replace tips after marking work resumes after extended downtime — old tips can corrode in storage. Always test the tip on a scrap piece before starting production marking — wasting an asset-tag because the tip is worn is more expensive than a precautionary tip change.

Generally no — each engraver manufacturer uses specific collet and tip-mounting patterns that aren't cross-compatible between makes. A Chicago Pneumatic tip won't fit a Sealey engraver and vice-versa. Some manufacturers offer cross-make adapter kits but these add complexity and may not give optimal performance. The practical approach: match consumable supply to the engraver make. For workshops with multiple engraver makes, keep matched-tip supplies for each. The compatible engraver make is on every consumable product page.

Yes. Pre-printed asset-tag blanks (in aluminium and stainless-steel materials, with pre-stamped or laser-etched serial numbers, fleet IDs, or QR codes), ID-label templates (for printing or marking custom asset numbers), and matched fastener kits (for attaching asset tags to plant equipment, vehicles, and tooling) are available across the asset-marking accessory range. WhatsApp 07754288583 to discuss bulk asset-tag requirements and confirm specific manufacturer options for fleet identification.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service