
Save Extra With 1 Offer
A. It is a 270 litre, 8HP industrial air compressor with twin 4HP pump and motor units designed for users limited to 230V single-phase supply.
A. The two twin cylinder aluminium compressor pumps together provide around thirty six cubic feet per minute displacement.
A. It has a maximum working pressure of about ten bar, or one hundred and fifty PSI, controlled by a fully automatic pressure switch.
A. Two four horsepower motors with overload protection start sequentially, allowing operation from a 230V supply rated at approximately forty five amps minimum.
A. It targets professional automotive and industrial users requiring very high compressed air volumes without access to three-phase power.
A. It uses a CE certified 270 litre horizontal air receiver providing substantial compressed air storage.
A. Safety valve, pressure gauge, air outlet valve and drain tap are all provided to help ensure safe pressure management and receiver maintenance.
A. Its higher displacement and twin four horsepower configuration support heavier tool loads and more simultaneous air consumption.
A. It is oil lubricated, helping the pump handle heavy duty usage when maintained with appropriate oil and servicing.
A. It measures roughly one thousand five hundred and seventy millimetres long, five hundred and fifteen wide and one thousand and forty high.
A. XE37/270 offers greater air displacement for operations requiring even more air capacity from the same receiver size and supply type.
By sharing your email, you agree to our privacy policy & terms of service