Agricultural hose covers the farm's particular plumbing: the suction and delivery hose of slurry, water and irrigation work, the layflat that runs across fields, and the general-duty hose that farm life consumes, in the larger bores and rougher duties the rest of the section's rows don't carry. PartsForMachines supplies agricultural hose by bore, construction and duty, with clips and fittings alongside.
The constructions follow farm work: suction-and-delivery hose, the helix-reinforced patterns that won't collapse when pumps pull from tanks, sumps and watercourses, in the medium and large bores slurry and water handling run, layflat delivery hose that rolls flat for storage and runs light across ground, and the general braided and reinforced hose of washdown and transfer duties, all specified by bore, construction and pressure or suction rating per product. Matching runs by bore and duty from the old hose or the pump and fittings it serves, with the couplings the farm already uses part of the specification.
The farm truths apply: suction hose lives or dies by its helix, a crushed or kinked spiral is permanent and terminal, layflat fails at the dragged edges and the couplings, so ends are protected and re-made rather than run torn, and UV, frost and slurry chemistry all age hose left lying out, which winter storage answers cheaply.
Diesel, engine and hydraulic hose share the section. For duty matching against a pump or coupling set, contact the team via WhatsApp 07754288583.
| I.D. (in / mm) | - / 30 |
|---|---|
| outer Ø (mm) | 35.20 |
| Bending Radius (mm) | 120.00 |
| Weight (kg/m) | 0.34 |
| Dimensions in Stock (m) | 50 |
| I.D. (in / mm) | 1.25 / 32 |
|---|---|
| outer Ø (mm) | 37.40 |
| Bending Radius (mm) | 130.00 |
| Weight (kg/m) | 0.37 |
| Dimensions in Stock (m) | 50 |
| I.D. (in / mm) | - / 40 |
|---|---|
| outer Ø (mm) | 47.00 |
| Vacuum (bar) | 0.600 |
| Operating pressure (20°C) (bar) | 6.000 |
| Bending Radius (mm) | 160.00 |
| I.D. (in / mm) | 2 / 50-51 |
|---|---|
| outer Ø (mm) | 59.00 |
| Vacuum (bar) | 0.600 |
| Operating pressure (20°C) (bar) | 5.000 |
| Bending Radius (mm) | 204.00 |
By sharing your email, you agree to our privacy policy & terms of service