Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
A cable tie is a temporary answer to a permanent question - fixed runs need a bolted, lined clip.
JCS describes its P-clips as suited to the most challenging environments, and the PESH6BG carries that specification at 6mm closed diameter: a TPE160 high-temperature liner rated -50C to +160C, UV and ozone resistant, wrapped in a ribbed band that bolts flush through a 10.8mm M10 fixing hole. Fixings are not supplied - pair it with your standard M10 hardware.
The M10 range shares its band dimensions with the M8 but takes the largest bolt - 304 stainless throughout for exposed and corrosive service, TPE160 liner as standard. Non-standard sizes and liner options are available from JCS on request where a run falls outside the catalogue sizes. The liner is UV and ozone resistant, so outdoor runs do not degrade it. A strengthening rib keeps the band flush to the mounting face once bolted.
Also available - the zinc plated version (PEZH6BG); the 8mm size (PESH8BG).
Non-standard sizes and liners are available from JCS on request - this catalogue size is the stocked, off-the-shelf format.
| Closed Diameter | 6mm (approx 1/4 in) |
|---|---|
| Bolt Type | M10 (hole 10.8mm) |
| Material | 304 stainless steel 18/8 (EN 1.4301, BS304) |
| Liner | TPE160 high-temperature liner (-50C to +160C), UV and ozone resistant |
| Overall Height (A) | 7mm |
| Leg/Base Length (B) | 21mm |
| Material Thickness (C) | 0.7mm |
| Tab Width (E) | 20mm |
| Clip Width (F) | 23mm |
| Clip Slot Width (G) | 12mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||||||||||||
| Technical Specification | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT NUMBER | PCJASS | PCJ10 | PCJ13 | PCJ16 | PCJ25 | PCJ29 | PCJ32 | PCJ35 | PCJ5 | PCJ6 | PCJ8 | 5-PC | 6-PC | 8-PC | 10-PC |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | |||||||||||
| Clip Type | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 10mm | 13mm | 16mm | 25mm | 29mm | 32mm | 35mm | 5mm | 6mm | 8mm | 5mm | 6mm | 8mm | 10mm | |
| Format | Assortment/Kit | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size | Single size |
| Lining | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | Rubber lined | ||||
| Pack Qty | 60 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||||
A. Its closed diameter is 6mm - match that to the outside diameter of the pipe, hose or cable you are fixing. If you need a size that is not listed, JCS makes non-standard sizes on request. That is approximately 1/4 in, if you work in imperial.
A. It does two jobs: cushioning the line against vibration and stopping the band chafing what it holds. The TPE160 high-temperature liner is UV and ozone resistant, rated -50C to +160C.
A. Yes - this range is supplied with the TPE160 high-temperature liner as standard, rated -50C to +160C, so it covers hot environments such as engine compartments as well as general duty.
A. Fixings are not included - pair the clip with your standard M10 hardware; the fixing hole is 10.8mm.
A. The 304 stainless version suits wet, salty or corrosive environments; the zinc plated version (coated on all surfaces including cut edges) suits general indoor and light industrial use. Both are made to identical dimensions, so you can switch material without changing your mounting.
A. The TPE liner is UV and ozone resistant, and the clip is available in heavily zinc plated steel or 304 stainless steel for outdoor and corrosive environments - choose stainless where conditions are persistently wet, and match the closed diameter to the tube you are fixing.
A. This is a pack of 25 clips, all 6mm closed diameter.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
 .png?v=1791969583)
 .png?v=1791969583)
 .png?v=1791969583)
 .png?v=1791969583)
