Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Machinery shakes; pipes and looms shouldn't. The clip between them does the absorbing.
JCS describes its P-clips as suited to the most challenging environments, and the PCZR25BG carries that specification at 25mm closed diameter: a standard TPE liner rated -30C to +60C, UV and ozone resistant, wrapped in a ribbed band that bolts flush through a 6.6mm M6 fixing hole. Fixings are not supplied - pair it with your standard M6 hardware.
Heavily zinc plated over mild steel with the plating applied after cutting, it is the everyday fixing for engine bays, chassis runs and workshop pipework in non-corrosive conditions; for persistently wet or salty duty the dimensionally identical stainless version is the straight swap. The standard liner's -30C to +60C rating covers general routing duty; where temperatures climb higher, the dimensionally identical high-temperature version takes over.
Also available - the high-temperature liner version (PCZH25BG); the 304 stainless version (PCSR25BG); the 22mm size (PCZR22BG); the 28mm size (PCZR28BG).
Designed, manufactured and tested in-house at Sudbury, Suffolk under ISO 9001:2015, with over 180 years of British manufacturing behind it.
| Closed Diameter | 25mm (approx 1 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | Mild steel, heavily electro zinc plated and passivated |
| Liner | standard TPE liner (-30C to +60C), UV and ozone resistant |
| Overall Height (A) | 17mm |
| Leg/Base Length (B) | 26mm |
| Material Thickness (C) | 1.2mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 50 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | PCSR25BG | PCZH25BG | PCZR44BG | PCZR48BG | PCZR52BG |
| Material | Stainless steel | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clip Type | P-clip | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 25mm | 25mm | 44mm | 48mm | 52mm |
| Fixing Thread | M6 | M6 | M6 | M6 | M6 |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | ||||
A. P-clips are sized by closed diameter, and this one closes at 25mm - so it suits a pipe, hose or cable with a 25mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request. That is approximately 1 in, if you work in imperial.
A. The standard TPE liner absorbs vibration and prevents chafing of the item being clamped. It is UV and ozone resistant and rated for service from -30C to +60C.
A. The liner is UV and ozone resistant, so sunlight does not degrade it, and the band comes in zinc plated or 304 stainless for outdoor duty - stainless where it stays wet. Size the clip to the outside diameter of the tube or pipe being fixed.
A. Yes - the design brief covers pipes, hoses and cables alike. The liner cushions the sheath against chafe and vibration, which matters as much on an armoured cable or air line as on a coolant hose. Size by outside diameter.
A. A hose clip makes a joint seal; a P-clip makes a run stay put. If the problem is a leak at a fitting, you want a hose clip - if the problem is a line that moves, chafes or rattles, you want this.
A. Yes - the band has a strengthening rib designed to keep the clip flush with the surface it is bolted to.
A. This is a pack of 50 clips, all 25mm closed diameter.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
