Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Neat, fixed, cushioned routing is what separates a tidy installation from a comeback job.
The PCSR16BG is a JCS lined P-clip with a 16mm closed diameter, sized to wrap a pipe, hose or cable of that outside diameter and bolt it to a surface through its M6 fixing hole (6.6mm). The standard TPE liner absorbs vibration and prevents chafing, is UV and ozone resistant, and is rated for service from -30C to +60C. A strengthening rib in the band keeps the clip flush against the mounting face. Fixing nuts and bolts are not supplied.
In 304 stainless (18/8, EN 1.4301), this is the version for runs that live outside or around moisture - the liner shrugs off UV and ozone, and the band will not rust where a plated clip eventually would. Dimensions are identical to the zinc version, so the mounting interchange is direct. The standard liner's -30C to +60C rating covers general routing duty; where temperatures climb higher, the dimensionally identical high-temperature version takes over. The 16mm closed diameter should equal the outside diameter of the pipe, hose or cable - not the bore.
Also available - the high-temperature liner version (PCSH16BG); the zinc plated version (PCZR16BG); the 13mm size (PCSR13BG); the 19mm size (PCSR19BG).
One specification covers pipes, hoses and cables alike - fewer part numbers, tidier stores.
| Closed Diameter | 16mm (approx 5/8 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | 304 stainless steel 18/8 (EN 1.4301, BS304) |
| Liner | standard TPE liner (-30C to +60C), UV and ozone resistant |
| Overall Height (A) | 12mm |
| Leg/Base Length (B) | 21mm |
| Material Thickness (C) | 0.9mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | PCZR16BG | PCSH16BG | PCJ16 | PCJ13 | PCJ21 |
| Material | Mild steel zinc plated | Stainless steel | |||
| Clip Type | P-clip | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 16mm | 16mm | 16mm | 13mm | 21mm |
| Fixing Thread | M6 | M6 | |||
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | ||||
| Lining | Rubber lined | Rubber lined | Rubber lined | ||
| Pack Qty | 25 | 25 | 25 | ||
| Show More | |||||
A. P-clips are sized by closed diameter, and this one closes at 16mm - so it suits a pipe, hose or cable with a 16mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request. That is approximately 5/8 in, if you work in imperial.
A. It does two jobs: cushioning the line against vibration and stopping the band chafing what it holds. The standard TPE liner is UV and ozone resistant, rated -30C to +60C.
A. Check your service temperature: the standard black TPE liner is rated -30C to +60C, while the grey TPE160 high-temperature liner is rated -50C to +160C. For engine bays and hot environments specify the high-temperature version.
A. Fixings are not included - pair the clip with your standard M6 hardware; the fixing hole is 6.6mm.
A. Pick by environment, not fit: 304 stainless for outdoor, wet or corrosive runs, zinc plated (coated even on the cut edges) for general indoor and light industrial work. The two are dimensionally identical, so the mounting never changes.
A. The TPE liner is UV and ozone resistant, and the clip is available in heavily zinc plated steel or 304 stainless steel for outdoor and corrosive environments - choose stainless where conditions are persistently wet, and match the closed diameter to the tube you are fixing.
A. This is a pack of 25 clips, all 16mm closed diameter.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
