Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS45PM1
Variations
Around water - pumped, sprayed or salt-laden - clip corrosion is the failure mode; the cure is marine-quality stainless in every component.
The HGS45PM1 is a Hi-Grip worm drive clip adjusting between 35-45mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 5.0 Nm (45 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
The specification is 18/8 (EN 1.4301) stainless throughout - band, housing and screw - carrying Lloyd's Register Type Approval and suited to salt water and other highly corrosive environments. The same clips serve agricultural irrigation, washdown plant and drainage systems. Measure the hose's fitted outside diameter and pick the range that covers it.
Also available - the 30-40mm size (HGS40PM1); and the related pack (HGS45RP).
An industry-standard marine clip, sized by honest adjustment ranges and backed by over 180 years of British manufacturing.
JCS recommends letting the application drive the choice - what the hose carries, the temperature and pressure it sees, and how corrosive the environment is; for wet and saltwater duty at this diameter, this is the specification.
| Adjustment Range | 35-45mm (approx 1 3/8 - 1 3/4 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 30-40mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS40PM1 (5 Pack)
£10.99
£10.67
3% OFF
|
|
| Technical Specification | ||
|---|---|---|
| PRODUCT NUMBER | HGS40PM1 | HGS45RP |
| Material | Stainless steel | Stainless steel |
| Clamping Range | 30-40mm | 35-45mm |
| Clip Type | Worm drive | Worm drive |
| Format | Single size | Single size |
| Grade | 304 | 304 |
| Pack Qty | 5 | 10 |
A. It adjusts between 35-45mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 35-45mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 3/8 to 1 3/4 in, covering common 1 1/2 and 1 3/4 in hose sizes.
A. For this size band JCS publishes a recommended torque of 5.0 Nm (45 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 5 clips, all 35-45mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
