Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Match by cable size in mm². Common cable-and-terminal pairings: 16mm² cable with terminals rated 16-25mm²; 25mm² cable with 25-35mm² terminals; 35mm² with 35-50mm²; 50mm² with 50-70mm² (heavy-duty plant and HGV starter cables). The terminal's cable-grip bore must accept the cable diameter. Most terminals have a clamping screw or bolt that compresses the cable into the terminal — the screw range covers a small variation in cable size. Always strip the cable cleanly to the depth specified for the terminal.

Top-post (lead-tapered post) terminals: the standard automotive and light-commercial fitment. The battery has lead posts emerging from the top; the terminal is a lead-tin alloy clamp that fits over the post and is tightened by a bolt-and-nut. Stud-mount (threaded-stud) terminals: the standard for commercial-vehicle and plant-equipment batteries. The battery has threaded studs emerging from the top; the terminal is a copper or brass terminal that bolts to the stud. Different fitments — match by the battery type and original terminal style.

Battery corrosion occurs when sulphuric acid vapour leaks from a flooded lead-acid battery vent or from over-pressure venting under heavy charging. The vapour reacts with lead and copper to form white-and-green corrosion products on the terminal and cable. Symptoms: poor starter-cranking even with a good battery, voltage drop across the terminal under load, white powdery deposits on the terminal. Prevention: keep the battery vent clear, wipe terminal surfaces clean, apply terminal-protective grease or spray after fitting (purpose-formulated, not general greases). Replace terminals when the corrosion can't be cleaned away.

Yes. Battery isolator switches (manual cut-off switches that disconnect the battery from the supply circuit — useful for safety during maintenance, long-term storage, and theft-prevention), quick-disconnect terminals (with a lever-action that releases the terminal from the post without tools), terminal-protective covers (rubber boots that shield the terminal from accidental short-circuit), and terminal-protective greases and sprays are available across the battery-accessory range. WhatsApp 07754288583 for fleet-and-trade-pack pricing.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Battery Terminal

FilterFilters
View as Grid List

Within Electrical Components, Battery Terminal covers the battery terminal clamps, connectors, and accessories used in plant equipment, agricultural machinery, telehandlers, commercial vehicles, and the wider battery-electrical-system aftermarket — covering lead-tin battery terminal clamps for traditional automotive-and-commercial top-post batteries, threaded battery-terminal clamps for stud-mount batteries, side-post terminal connectors, battery-terminal extenders, terminal protectors and corrosion guards, and the matching battery-terminal isolators and quick-disconnect fittings.

Parts for Machines supplies battery terminals across the plant, agricultural, and commercial-vehicle aftermarket. The category covers both standard automotive battery terminals (for top-post batteries — lead-tin construction with bolt-clamp tightening) and the heavier-duty industrial battery terminals (stud-mount, threaded-stud, and large-cable applications used in commercial-vehicle and plant-equipment service).

Product pages list the terminal type (top-post clamp, stud-mount, side-post, extender), the polarity (positive or negative — typically marked with red and black colour-coding, with the positive terminal larger than the negative on top-post batteries), the cable size compatibility (in mm² — the cable bore must match the terminal's cable-grip range), the construction (lead-tin alloy for general-automotive; brass or plated copper for higher-current and corrosion resistance), the bolt-and-stud specification, and any specific certifications.

For replacement of an existing battery terminal, match by the original terminal's type, polarity, and cable size. Terminal-and-cable corrosion is a common cause of battery-circuit problems — terminal replacement together with cable-end re-crimping resolves most poor-connection symptoms. Heavy-duty battery terminals for HGV, plant, and military applications use larger cable sizes and typically threaded-stud or wing-nut tightening for higher current capacity. The terminal's bolt or stud must match the cable lug at the other end of the connection — common cable-lug sizes are 8mm, 10mm, 12mm bolt-hole. Specialist anti-spark battery terminals (with insulating shrouds and recessed contact points) are available where electrical-spark risk needs additional management. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 1 of 1 entries
FAQs

Match by cable size in mm². Common cable-and-terminal pairings: 16mm² cable with terminals rated 16-25mm²; 25mm² cable with 25-35mm² terminals; 35mm² with 35-50mm²; 50mm² with 50-70mm² (heavy-duty plant and HGV starter cables). The terminal's cable-grip bore must accept the cable diameter. Most terminals have a clamping screw or bolt that compresses the cable into the terminal — the screw range covers a small variation in cable size. Always strip the cable cleanly to the depth specified for the terminal.

Top-post (lead-tapered post) terminals: the standard automotive and light-commercial fitment. The battery has lead posts emerging from the top; the terminal is a lead-tin alloy clamp that fits over the post and is tightened by a bolt-and-nut. Stud-mount (threaded-stud) terminals: the standard for commercial-vehicle and plant-equipment batteries. The battery has threaded studs emerging from the top; the terminal is a copper or brass terminal that bolts to the stud. Different fitments — match by the battery type and original terminal style.

Battery corrosion occurs when sulphuric acid vapour leaks from a flooded lead-acid battery vent or from over-pressure venting under heavy charging. The vapour reacts with lead and copper to form white-and-green corrosion products on the terminal and cable. Symptoms: poor starter-cranking even with a good battery, voltage drop across the terminal under load, white powdery deposits on the terminal. Prevention: keep the battery vent clear, wipe terminal surfaces clean, apply terminal-protective grease or spray after fitting (purpose-formulated, not general greases). Replace terminals when the corrosion can't be cleaned away.

Yes. Battery isolator switches (manual cut-off switches that disconnect the battery from the supply circuit — useful for safety during maintenance, long-term storage, and theft-prevention), quick-disconnect terminals (with a lever-action that releases the terminal from the post without tools), terminal-protective covers (rubber boots that shield the terminal from accidental short-circuit), and terminal-protective greases and sprays are available across the battery-accessory range. WhatsApp 07754288583 for fleet-and-trade-pack pricing.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service