Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Electrical Component

Start Now

Shop by Sub Category

FAQs

Three matches: (1) operating voltage — 12V or 24V to match the system; (2) pump type — single-outlet for screen-only systems, dual-outlet for screen-and-headlamp systems, high-pressure for headlamp-only systems; (3) physical mount and connector — most pumps are push-fit into a rubber grommet on the reservoir bottle, with a 2-pin or 3-pin connector. The OEM part number is the fastest match where available; for older equipment, WhatsApp 07754288583 with the equipment details and a photograph.

Common causes: blocked or kinked washer hose downstream of the pump; blocked or partially blocked washer-jet nozzles; air-lock in the pump (try briefly disconnecting the outlet hose, running the pump, then reconnecting); failed pump impeller (the motor still runs but the impeller is no longer pumping). For a pump that runs but doesn't pump, check the hose and jets first before condemning the pump. If the pump itself is at fault, the pump body sometimes leaks while running — confirm by feeling for fluid at the pump outlet.

Yes. Some washer pumps include integrated mesh filters at the inlet — preventing reservoir debris (particles from old fluid, ice fragments in winter use, residue from screenwash additives) from entering and damaging the pump impeller. Where the original pump has an integrated filter, the replacement should match. Where retrofit is desired, in-line filters can be fitted in the washer hose between the reservoir and the pump. The filter specification is listed on every pump product page.

Washer pumps in light-vehicle service typically last 5-10 years before motor or impeller failure. Hard service (frequent use, hot climates with cracked screens, dirty reservoirs) can shorten life. Common failure modes: motor brushes wearing (older brushed pumps), impeller seizing on contamination, internal seal failure causing fluid leak into motor housing. Maintenance is minimal — keep the reservoir filled with proper screenwash fluid (avoiding hard water deposits and freezing), and clear any reservoir-bottle debris during service.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Washer Pump

FilterFilters
View as Grid List

Within Washer Pump & Accessory, Washer Pump covers the electric washer-fluid pumps themselves — the screen-washer, headlamp-washer, and rear-screen-washer pumps fitted to plant equipment, agricultural tractors, telehandlers, commercial vehicles, and the wider off-highway and on-highway aftermarket. The sub-category groups together washer pumps separately from the matching accessories (reservoir bottles, hoses, jet nozzles) for direct selection by application.

Parts for Machines supplies washer pumps across the plant, agricultural, and commercial-vehicle aftermarket — covering both OEM-pattern washer pumps (matched to specific equipment fitments) and universal-fit washer pumps (sized to standard reservoir-mount fittings).

Product pages list the operating voltage (12V or 24V to match the equipment electrical system), the pump type (single-outlet, dual-outlet, high-pressure for headlamp washers), the flow rate (in litres per minute or millilitres per second), the operating pressure (typical 0.5-2 bar for screen washers; 4-7 bar for headlamp washers), the current draw, the mounting style (push-fit rubber grommet into reservoir; bolt-mount onto bracket), the connector type (2-pin or 3-pin Mate-N-Lok is standard), and the OEM cross-reference where applicable.

For replacement of an existing washer pump, the OEM part number is the most reliable match. Where the OEM number isn't available, identify by voltage, pump type, mounting style, and flow rate. The rubber grommet sealing the pump into the reservoir is typically pump-specific — most generic-fit pumps include the matching grommet; OEM-pattern pumps fit the original grommet without modification. Some equipment uses two single-outlet washer pumps in the same reservoir — one for the windscreen circuit and one for the headlamp washer circuit. Where the equipment runs two pumps, replace both at the same time if the equipment is older — the second pump is likely close to failing if the first has just failed, and the reservoir-bottle disassembly to replace one pump is straightforward to extend to both. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 123 entries
FAQs

Three matches: (1) operating voltage — 12V or 24V to match the system; (2) pump type — single-outlet for screen-only systems, dual-outlet for screen-and-headlamp systems, high-pressure for headlamp-only systems; (3) physical mount and connector — most pumps are push-fit into a rubber grommet on the reservoir bottle, with a 2-pin or 3-pin connector. The OEM part number is the fastest match where available; for older equipment, WhatsApp 07754288583 with the equipment details and a photograph.

Common causes: blocked or kinked washer hose downstream of the pump; blocked or partially blocked washer-jet nozzles; air-lock in the pump (try briefly disconnecting the outlet hose, running the pump, then reconnecting); failed pump impeller (the motor still runs but the impeller is no longer pumping). For a pump that runs but doesn't pump, check the hose and jets first before condemning the pump. If the pump itself is at fault, the pump body sometimes leaks while running — confirm by feeling for fluid at the pump outlet.

Yes. Some washer pumps include integrated mesh filters at the inlet — preventing reservoir debris (particles from old fluid, ice fragments in winter use, residue from screenwash additives) from entering and damaging the pump impeller. Where the original pump has an integrated filter, the replacement should match. Where retrofit is desired, in-line filters can be fitted in the washer hose between the reservoir and the pump. The filter specification is listed on every pump product page.

Washer pumps in light-vehicle service typically last 5-10 years before motor or impeller failure. Hard service (frequent use, hot climates with cracked screens, dirty reservoirs) can shorten life. Common failure modes: motor brushes wearing (older brushed pumps), impeller seizing on contamination, internal seal failure causing fluid leak into motor housing. Maintenance is minimal — keep the reservoir filled with proper screenwash fluid (avoiding hard water deposits and freezing), and clear any reservoir-bottle debris during service.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service